Inconel 600 (UNS N06600) is a nickel‑chromium alloy with a high nickel content (approximately 72%) and chromium content (14–17%). This composition provides excellent resistance to many high‑temperature corrosive environments, including carburizing and sulfidizing atmospheres.
Resistance to Carburization
Inconel 600 exhibits good carburization resistance due to its high nickel content and the formation of a stable chromium oxide (Cr₂O₃) surface layer. Key points include:
Nickel is a strong austenite stabilizer and does not readily form carbides, which helps prevent carbon uptake into the matrix.
Chromium forms a protective oxide scale that acts as a barrier to carbon diffusion.
At temperatures above 900°C (1650°F), the oxide scale may become less stable, increasing the risk of carburization over long exposure times.
In strongly carburizing environments (e.g., high CO/CO₂ ratios, methane‑rich atmospheres), localized carburization or metal dusting can occur if the oxide layer is damaged or not maintained.
Resistance to Sulfidation
Inconel 600 also demonstrates good sulfidation resistance, particularly in environments with moderate sulfur partial pressures. This is attributed t
The formation of a protective chromium sulfide (Cr₂S₃) layer, which inhibits further sulfur penetration.
Nickel has a lower affinity for sulfur compared to iron, reducing the formation of brittle sulfides.
However, in highly aggressive sulfidizing environments (e.g., high H₂S/SO₂ ratios or low‑oxygen partial pressures), the protective oxide/sulfide layer may not form effectively, leading to accelerated attack.
At temperatures above 800°C (1470°F), sulfidation rates increase, and the alloy may experience significant corrosion if the environment is strongly sulfidizing.




Limitations and Considerations
Inconel 600 is not immune to carburization or sulfidation; it is resistant but not completely immune.
High temperatures, long exposure times, and aggressive gas compositions can degrade the protective surface layers.
For extremely carburizing or sulfidizing conditions, alloys with higher chromium (e.g., Inconel 601) or aluminum (e.g., Incoloy 800H) may offer better performance.
Summary
Inconel 600 provides good resistance to both carburization and sulfidation under most industrial conditions, especially at moderate temperatures. Its high nickel and chromium contents help form stable protective oxide/sulfide layers, but performance decreases at very high temperatures or in highly aggressive environments.





