Dec 21, 2025 Leave a message

nimonic-75-1-2-(1).pdf

Nimonic 75 (UNS N06075 / W.Nr. 2.4951, 2.4630)

Nimonic® 75 is a Nickel-Chromium alloy with good corrosion and heat resistance, and contains Titanium and Carbon as additives. Initially used as turbine blades in the 1940s, Nimonic® 75 is readily fabricated and welded, and is now more regularly used in gas turbine engines, industrial furnaces and nuclear engineering.

Nimonic® 75 is also known as Nicrofer 7520.

 

Key Features

Good corrosion resistance
Good heat resistance
High temperature static applications

 

Designations

W.Nr 2.4951
W.Nr 2.4630
UNS N06075
AWS 032

 

Specifications

BS HR 5
BS HR 504

 

Chemical Composition

The chemical composition of Nimonic® 75 is indicated in the table below:

Element Min % Max %
C 0.08 0.15
Si – 0.30
Mn – 1.00
S – 0.15
Co – 5.00
Cr 19.0 21.00
Cu – 0.50
Fe – 5.00
Pb – 0.005
Ti 0.2 0.50
P – 0.015
Al – 0.40
Ni bal
  • Nimonic 75 tubing heat exchanger
    Nimonic 75 tubing heat exchanger
  • Nimonic 75 pipe high temperature service
    Nimonic 75 pipe high temperature service
  • Nimonic 75 sheet fabrication aerospace
    Nimonic 75 sheet fabrication aerospace
  • Nimonic 75 sheet annealing pickling

     

    Nimonic 75 sheet annealing pickling

Alloy Details

Nimonic® 75 density, melting point, coefficient of expansion, modulus of rigidity, and elasticity is indicated in the table below:

Density Melting Point Coefficient of Expansion Modulus of Rigidity Modulus of Elasticity
8.37 g/cm³ 1380 °C 11.0 μm/m °C (20 – 100 °C) 75.6 kN/mm² 206 kN/mm²
0.302 lb/in³ 2520 °F 6.1 x 10-6 in/in °F (70 – 212 °F) 10965 ksi 29878 ksi

 

Heat treatment of finished parts

The typical heat treatment of Nimonic® 75:

Condition as supplied by AWI Type Temperature Time Cooling
Annealed or Spring Temper Stress Relieve 450 – 470 °C (840 – 880 °F) 0.5 – 1 Air

 

Properties

The typical mechanical properties of Nimonic® 75:

Annealed    
Approx. tensile strength <800 N/mm² <116 ksi
Approx. operating temperature depending on load** and environment -200 to +1000 °C -330 to +1830 °F

 

Spring Temper    
Approx. tensile strength 1200 – 1500 N/mm² 174 – 218 ksi
Approx. operating temperature depending on load** and environment -200 to +1000 °C -330 to +1830 °F

 

Our product range

Product Form Standard Specifications Typical Sizes / Dimensions Common Standards (Examples)
Sheet & Plate Thickness: 0.5mm – 50mm
Width: 1000mm – 2000mm
Length: 2000mm – 6000mm
• Coils / Strips
• Cut-to-Length Sheets
• Heavy Plates
ASTM B168, B906
ASME SB168
EN 10095, DIN 17752
Bar & Rod Diameter: 6mm – 300mm
Length: 3000mm – 6000mm (straight)
• Round Bars
• Hexagonal Bars
• Square Bars
• Forging Billets
ASTM B166 (rod/bar)
ASTM B564 (forgings)
Pipe & Tube Seamless Pipe: OD 6mm – 300mm, SCH 5S to XXS
Welded Tube: OD 10mm – 500mm, Wall as required
Heat Exchanger Tube: OD 12.7mm – 50mm
• Hydraulic & Instrumentation Tubing
• Boiler & Heat Exchanger Tubes
• Mechanical Tubing
ASTM B167, B163, B517/B75
ASTM B622 (seamless)
ASTM B619/B626 (welded)
Fittings & Flanges Class: 150 LBS to 2500 LBS
Schedules: Matching pipe specifications
• Elbows (90°/45°)
• Tees, Reducers, Caps
• Socket Weld & Butt-Weld Fittings
• Slip-On & Weld Neck Flanges
ASTM SB366
ASME B16.9 / B16.5
MSS-SP-43 / SP-75
Wire & Electrodes Diameter: 0.5mm – 5.0mm (Wire)
Standard Sizes (Covered Electrodes)
• Welding Wire (spool, coil)
• Filler Metal Rods
• SMAW Electrodes
AWS A5.14 / A5.11
EN ISO 18274 / 14172

Get the complete product catalog

 

Our factory

 Our factory is equipped with state-of-the-art production facilities. The facility features advanced melting and thermo-mechanical processing lines, including Vacuum Induction Melting (VIM) furnaces and precision rolling mills, which transform raw materials into high-performance alloy products in forms such as plates, sheets, tubes, and bars. To ensure that every product meets the most stringent international standards and customer drawing requirements, we operate an in-house laboratory with comprehensive testing capabilities. Testing includes spectrometric chemical analysis, mechanical property testing, and non-destructive testing (NDT) methods such as ultrasonic and penetrant inspection. Governed by a certified quality management system, our integrated production process-from raw materials to finished products-ensures full traceability and consistent quality assurance.

Forming Nimonic 75 plate cold working

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry