Nickel Alloy Alloy 601 (2.4851)
Nickel Alloy Alloy 601 (2.4851)
Alloy 601 (2.4851) is a versatile nickel-based alloy that is very popular in industrial applications due to its excellent high temperature properties and corrosion resistance.
Definition:
Density: 8.11 g/cm³
Melting range: 1360-1411°C
Specific heat: 448 J/kg(°C)
Curie temperature: -196°C
Magnetic permeability at 200 Oersted (15.9 kA/m): 1.003
Coefficient of thermal expansion: 13.75 (24 - 100°C μm/m-°C)
Thermal conductivity: 11.2 W/m(°C)
Resistivity: 1.19 mm²(m)


Physical and thermal properties:
NiCrFe (UNS N06601 / W.Nr. 2.4851) is an engineering material suitable for applications requiring heat and corrosion resistance.
It has excellent high temperature oxidation resistance.
It also has good resistance to aqueous corrosion, high mechanical strength, and is easy to process and form.
The alloy composition provides a high degree of metallurgical stability and uniformity of surface center.
Alloy 601 is resistant to a wide range of corrosive environments and high temperature environments due to its nickel base and high chromium content.
Oxidation resistance is enhanced by the aluminum content.
The properties of Alloy 601 make it widely used in heat treatment, chemical processing, pollution control, aviation and energy production.
It is a standardized material for a variety of heat treatment equipment, including baskets, trays and fixtures used in heat treatment processes such as annealing, carburizing and nitriding.
In industrial furnaces, Alloy 601 is used for radiant tubes, muffle furnaces, electric heating elements, heaters, electric heating wire mesh, conveyor belts, chain curtains, cloth curtains and electric heating elements.
Other heat treatment applications include thermocouple protection tubes, furnace-atmosphere generators and sintering radiation screens.
In chemical processing, Alloy 601 is used for process heaters, condenser piping and catalyst boxes in ammonia reformers.
It is also used for combustion components and catalyst supports in nitric acid production equipment.
In petrochemical processing, Alloy 601 is used in catalyst regenerators and air preheaters in high-density polyethylene production.
In pollution control applications, Alloy 601 is used in thermal reactors in gasoline engines and combustion chambers in incinerators.
In the energy production sector, Alloy 601 is used for superheater pipe supports, burner barriers and ash handling systems.
Alloy 601 is also used in jet engine combustion chambers, diffusers, gas turbine shrouds in aircraft and industrial applications.
Chemical composition analysis:
Nickel (Ni): 58.0-63.0%
Chromium (Cr): 21.0-25.0%
Aluminum (Al): 1.0-1.7%
Iron (Fe): Balance
Carbon (C): Maximum 0.10%
Manganese (Mn): Maximum 1.0%
Silicon (Si): Maximum 0.50%
Sulfur (S): Maximum 0.015%
Copper (Cu): Maximum 1.0%
Mechanical properties (annealing):
Creep strength (1000 hours): 28.0 ksi (195 MPa) at 650°C, 9.1 ksi (63 MPa) at 760°C, 4.3 ksi (30 MPa) at 870°C, 2.1 ksi (14 MPa) at 980°C, 1.0 ksi (7 MPa) at 1095°C





