Monel K500 (Alloy K500UNS N05500) alloy overview, MonelK500 implementation standards
Monel K500 (Alloy K500 UNS N05500) copper-nickel alloy rods, plates, tubes, etc. can be customized and can be cut to pieces
Monel K500 alloy provides users with finished product specifications:
Monel K500 alloy bar, Monel K500 alloy forged rod, Monel K500 alloy plate, Monel K500 alloy seamless pipe, Monel K500 alloy strip, Monel K500 alloy coil, Monel K500 alloy wire, Monel K500 alloy flat bar, Monel K500 Alloy round rod, Monel K500 alloy thick plate, Monel K500 alloy bare rod, Monel K500 alloy round steel, Monel K500 alloy round cake, Monel K500 alloy welding wire, etc. can be customized
Monel K500 alloy has excellent corrosion resistance and higher strength and hardness than Monel 400. This is due to the addition of Al, Ti and other elements to the alloy, and after a certain heat treatment, there are dispersed intermetallic compounds on the matrix. The organizational structure is a single-phase austenite structure and is precipitated by dispersed Ni3 (Al, Ti) precipitation phases.
Monel K500 has approximately three times the yield strength and twice the tensile strength of Monel 400, and higher mechanical properties can be obtained through cold working or age hardening. Monel K500 alloy has the same corrosion resistance as Monel 400 alloy.
Monel K500 alloy is mainly used for pump shafts and impellers, conveyor scrapers, oil well drill rings, elastic parts, valve gaskets, etc. Others can also manufacture various heat exchange equipment, boiler feed water heaters, petroleum and chemical pipelines, containers, towers, tanks, valves, pumps, reactors, shafts, etc. Due to its low corrosion rate in flowing seawater and the high strength of this alloy, Monel K500 is suitable for manufacturing centrifugal pump shafts that are resistant to seawater corrosion. Suitable for both static and flowing sea water.
Implementation standards: ASTM B 865, AMS 4676.
