Jan 19, 2026 Leave a message

Datasheet-For-Inconel-600-1-7-(1)-1-6.pdf

Main differences between Inconel 601 and Inconel 600 alloy

What are the main differences between Inconel 601 and Inconel 600?
1.Chemical Composition
– Inconel 600 has a higher nickel content (typically 72% Ni) and lower chromium (14–17% Cr), with minimal iron (6–10% Fe).
– Inconel 601 contains more chromium (21–25% Cr) and a significant amount of iron (10–15% Fe), with a lower nickel content (58–63% Ni). It also includes aluminum (1.0–1.7%), which is not present in 600.
2.High‑Temperature Oxidation Resistance
– Inconel 601 has significantly better oxidation resistance than 600, especially at temperatures above 1000°C. The aluminum in 601 forms a dense, adherent alumina (Al₂O₃) scale that provides superior protection against high‑temperature oxidation and scaling.
– Inconel 600 relies mainly on chromium for oxidation resistance, which is effective but not as robust as the alumina layer formed by 601.
3.Carburization and Nitridation Resistance
– Inconel 601 has better resistance to carburization and nitridation due to its higher chromium and aluminum content.
– Inconel 600 is more susceptible to these forms of high‑temperature attack, especially in carbon‑rich or nitrogen‑rich environments.
4.High‑Temperature Strength
– Inconel 601 exhibits higher creep and rupture strength at temperatures above 900°C compared to 600.
– Inconel 600 has good strength but is generally not as strong as 601 at very high temperatures.
info-344-346info-350-346
info-350-346info-349-347
5.Thermal Stability and Cyclic Oxidation Resistance
– Inconel 601 is highly resistant to thermal cycling and maintains its mechanical properties and oxidation resistance even after prolonged exposure to extreme temperatures.
– Inconel 600 is less resistant to cyclic oxidation and may experience more rapid degradation under repeated heating and cooling.
6.Typical Applications
– Inconel 601 is preferred for applications requiring maximum oxidation resistance and strength at temperatures up to 1100–1200°C, such as furnace components, radiant tubes, kiln parts, and heat‑treating fixtures.
– Inconel 600 is used in applications where corrosion resistance (especially to chloride stress corrosion cracking) is more critical than ultra‑high‑temperature performance, such as chemical processing, nuclear engineering, and heat‑exchanger tubing.
In summary, Inconel 601 is a higher‑performance alloy for extreme high‑temperature environments, while Inconel 600 is more focused on general corrosion resistance and moderate‑temperature strength.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry