Jan 14, 2026 Leave a message

Datasheet-For-Inconel-601-1-6-(1)-(1).pdf

Main Chemical Composition of 601 Inconel

1.Main Chemical Composition of Inconel 601
The typical nominal composition of Inconel 601 (weight percent) is as follows:
• Nickel (Ni): 58% minimum (balance)
• Chromium (Cr): 21–25%
• Aluminum (Al): 1.0–1.7%
• Iron (Fe): Up to 10%
• Carbon (C): 0.10% maximum
• Manganese (Mn): 1.0% maximum
• Silicon (Si): 0.5% maximum
• Copper (Cu): 0.5% maximum
• Sulfur (S): 0.015% maximum
This composition gives Inconel 601 its outstanding ability to resist oxidation at temperatures up to 1100°C (2012°F) and maintain good mechanical strength in long‑term high‑temperature service.
2.Roles of Nickel, Chromium, and Aluminum in Inconel 601
Nickel (Ni)
• Acts as the base metal and forms the primary austenitic matrix.
• Provides high‑temperature strength and toughness.
• Enhances corrosion resistance in many environments, especially in reducing conditions.
• Improves ductility and weldability, making the alloy easier to fabricate.
• Helps stabilize the microstructure against phase transformations at elevated temperatures.
Chromium (Cr)
• Is the main element responsible for oxidation resistance
.• Forms a dense, adherent chromium oxide (Cr₂O₃) scale on the surface, which protects the alloy from further oxidation and corrosion.
• Enhances resistance to sulfidation, carburization, and nitridation at high temperatures
.• Contributes to solid‑solution strengthening, improving high‑temperature strength.
• Helps maintain structural stability by reducing the tendency for grain growth.
info-351-351info-351-350
info-351-350info-346-346
Aluminum (Al)
• Works synergistically with chromium to improve oxidation resistance
.• Promotes the formation of a protective alumina (Al₂O₃) layer at very high temperatures, which is even more stable than Cr₂O₃.
• Increases high‑temperature creep strength by forming fine, dispersed intermetallic phases such as Ni₃Al (gamma‑prime).
• Improves cyclic oxidation resistance, making the alloy suitable for applications with repeated heating and cooling
.• Contributes to surface stability and reduces spalling of the oxide layer.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry