Jan 30, 2026 Leave a message

Is Monel 400 Resistant to Media Containing Chlorates

Is Monel 400 Resistant to Media Containing Chlorates?
Monel 400, a nickel‑copper solid‑solution alloy, exhibits excellent corrosion resistance in many neutral, alkaline, and non‑oxidizing acidic environments, but it shows poor resistance and cannot be safely used in media containing chlorates, especially under acidic or heated conditions.
Chlorates are strong oxidizing salts. In aqueous solutions, especially acidic chlorate solutions, chlorate ions act as strong oxidizing agents that can break down the thin, passive oxide film composed mainly of nickel and copper oxides on the surface of Monel 400. Once this protective passive layer is destroyed, the alloy matrix is directly exposed to the corrosive medium, leading to rapid and accelerated corrosion, including uniform corrosion, pitting corrosion, and even intergranular corrosion.
info-346-348info-351-350
info-351-350info-350-353
The corrosion risk is closely related to temperature, concentration, and pH value:
At room temperature and in neutral, dilute chlorate solutions, the corrosion rate may be relatively slow at the initial stage, but long‑term exposure will still cause gradual degradation of the passive film and continuous material loss.
As temperature rises or the solution becomes acidic, the oxidizing effect of chlorates is significantly enhanced, resulting in a sharp increase in the corrosion rate. Monel 400 is not suitable for elevated‑temperature chlorate service under any circumstances.
In industrial processes involving chlorate bleaching, chlorate‑based oxidizing agents, or process streams containing chlorate byproducts, Monel 400 is not a recommended material. More resistant alloys such as high‑nickel chromium‑molybdenum alloys (e.g., Hastelloy C‑276) or titanium alloys are typically preferred for such oxidizing halide salt environments.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry