Feb 04, 2026 Leave a message

Is Grade 2 corrosion resistant in seawater

1.Is Grade 2 corrosion resistant in seawater?
Yes, Grade 2 (Unalloyed Titanium, Ti-CP Grade 2) exhibits excellent corrosion resistance in seawater. It forms a stable, protective oxide film (TiO₂) on its surface when exposed to oxygen, which effectively prevents corrosion in natural seawater environments, including marine splash zones, tidal zones, and submerged conditions. It is highly resistant to general corrosion, pitting, crevice corrosion, and stress corrosion cracking (SCC) in seawater at ambient temperatures. However, at elevated temperatures (typically above 120°C) or in crevices with stagnant, low-oxygen seawater, localized corrosion may occur under specific conditions.
2. Is Grade 2 resistant to acids and alkalis?
Acids: Grade 2 has good corrosion resistance in oxidizing acids such as nitric acid, chromic acid, and concentrated sulfuric acid (at low temperatures). It is also resistant to most organic acids (e.g., acetic acid, citric acid) and dilute non-oxidizing acids (e.g., dilute hydrochloric acid, dilute sulfuric acid) at room temperature. However, its corrosion resistance decreases significantly in concentrated, hot non-oxidizing acids (e.g., hot concentrated HCl, H₂SO₄) and hydrofluoric acid (HF), which attacks the oxide film.
Alkalis: Grade 2 demonstrates excellent resistance to most alkaline solutions, including sodium hydroxide (NaOH), potassium hydroxide (KOH), and calcium hydroxide (Ca(OH)₂), across a wide range of concentrations and temperatures. It is stable in both dilute and concentrated alkalis, with no significant corrosion observed under normal conditions.
info-350-349info-349-347
info-349-347info-347-350
3. Is Grade 2 resistant to pitting and crevice corrosion?
Grade 2 has good resistance to pitting corrosion in most natural environments, including seawater, due to its stable passive oxide layer. It is less prone to pitting than many stainless steels in chloride-containing environments.
For crevice corrosion, Grade 2 performs well in typical ambient-temperature seawater and many chemical environments. However, it is susceptible to crevice corrosion under severe crevice conditions (e.g., tight gaps, stagnant solutions, high chloride concentrations, and elevated temperatures, generally above 70–80°C). In such cases, localized breakdown of the passive film within crevices can lead to accelerated corrosion. Higher-grade titanium alloys (e.g., Grade 7, Grade 12) offer improved crevice corrosion resistance for more aggressive crevice environments.
 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry