Apr 17, 2024 Leave a message

Is C276 an Inconel? No, It's Hastelloy

Short Answer: No, C276 Is Hastelloy

Alloy C-276 is not an Inconel. It belongs to the Hastelloy family of nickel-molybdenum-chromium alloys and is designated UNS N10276 (W.Nr. 2.4819). Inconel is a separate family of nickel-chromium-iron alloys. The confusion is common because both names describe premium nickel alloys used in demanding service, but their composition and design goals are different.

What Is Hastelloy C276?

Alloy C-276 is a solid-solution strengthened nickel-molybdenum-chromium alloy containing a small amount of tungsten. It offers excellent corrosion resistance in a wide range of harsh environments and media, including wet chlorine, hot acids and chloride solutions, and it is ductile and easy to shape and weld. It is typically used where corrosive chemical environments would destroy other alloys, which makes it a standard material for chemical processing and pollution-control equipment.

Chemical Composition of C276

The composition below follows ASTM B575 (all values in weight percent). The high molybdenum and tungsten content is the reason C276 resists pitting, crevice corrosion and stress-corrosion cracking in chloride and acid media.

Element Composition (%)
Nickel (Ni) Remainder
Molybdenum (Mo) 15.0–17.0
Chromium (Cr) 14.5–16.5
Iron (Fe) 4.0–7.0
Tungsten (W) 3.0–4.5
Cobalt (Co) 2.5 max
Manganese (Mn) 1.0 max
Vanadium (V) 0.35 max
Silicon (Si) 0.08 max
Phosphorus (P) 0.04 max
Sulfur (S) 0.03 max
Carbon (C) 0.010 max

Industries and Applications

C276 is used across chemical and petrochemical processing, oil and gas, power generation, pharmaceuticals, pulp and paper, and wastewater treatment. Typical end-use applications include chimney liners, ducts, dampers, scrubbers, flue-gas reheaters, heat exchangers, reaction vessels, evaporators and transfer piping handling highly corrosive streams.

Inconel vs. Hastelloy: Why the Confusion

Both names are trade names for nickel-based alloy families, and both are stocked in similar product forms. The practical distinction: Inconel grades such as 718 and X-750 are selected for high-temperature strength and oxidation resistance, while Hastelloy grades such as C276 are selected for corrosion resistance in acids, chlorides and other aggressive media. When a component needs both high-temperature load-bearing strength and corrosion resistance, the design usually combines materials or selects a grade on the basis of the dominant failure mode rather than a brand name.

FAQ

Can Hastelloy C276 replace Inconel 718?

Not in load-bearing high-temperature service. Inconel 718 has far higher strength above 600°C; C276's advantages are corrosion properties, not mechanical strength at high temperature.

Is C276 magnetic?

No. C276 is essentially non-magnetic with low magnetic permeability, which suits instruments and magnetic-sensitive equipment.

Is C276 weldable?

Yes. C276 is ductile and readily welded with matching ERNiCrMo-4 filler, and its low carbon and silicon content minimizes the risk of heat-affected-zone corrosion.

Is C276 more expensive than Inconel 625?

Prices follow raw material markets; C276's high molybdenum and tungsten content usually makes it comparable to or slightly more expensive than 625 in equivalent forms, so compare firm quotations.

Why is C276 specified in scrubbers and FGD systems?

Flue-gas desulfurization environments combine chlorides, acids and temperature cycles; C276 resists the pitting, crevice corrosion and stress-corrosion cracking that destroy stainless steels in that duty.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry