Information about Inconel 600 alloy

Information about Inconel 600 alloy
Inconel 600 (UNS N06600) is a high-performance nickel-chromium alloy known for its exceptional strength and resistance to corrosion, oxidation, and chloride-induced stress corrosion cracking (CISCC), with an operating temperature range from cryogenic temperatures up to 2000°F (1093°C). This makes it crucial in applications such as nuclear power, chemical processing, and furnace components. The alloy is primarily strengthened through cold working rather than heat treatment and exhibits excellent weldability and durability in harsh environments.
Is Inconel 600 magnetic?
Inconel 600 is non-magnetic and possesses excellent mechanical properties, combining high strength with good workability, and is easily welded. The cold-forming characteristics of the 600 alloy are similar to those of chromium-nickel stainless steel.

What is Inconel 600?
Inconel 600 is a nickel-chromium alloy designed for use at temperatures below 2000°F (approximately 1093°C) and in cryogenic environments. Due to its resistance to chromium-nickel alloys and mild oxidizing conditions, this alloy is resistant to cryogenic environments and chloride stress corrosion cracking. Inconel 600 is a non-magnetic, work-hardening alloy that exhibits excellent mechanical properties at both low and high temperatures due to its high nickel content. Nickel materials are susceptible to attack by sulfur-containing substances when exposed to high-temperature environments.
Inconel 600 Chemical Composition
| Element | Content % |
|---|---|
| Nickel, Ni | 72.0 |
| Chromium, Cr | 14.0 – 17.0 |
| Iron, Fe | 6.0 – 10.0 |
| Carbon, C | 0.05 – 1.50 |
| Manganese, Mn | ≤ 1.0 |
| Silicon, Si | ≤ 0.5 |
| Copper, Cu | ≤ 0.5 |
| Aluminum, Al | ≤ 0.3 |
| Titanium, Ti | ≤ 0.3 |
| Boron, B | ≤ 0.006 |
| Phosphorus, P | ≤ 0.015 |
| Sulfur, S | ≤ 0.015 |
Physical Properties of Alloy 600
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.47 g/cc | 0.306 lb/in³ |
| Melting Range | 1354-1413°C | 2470-2575°F |
| Electrical Resistivity | 620 ohm-circ mil/ft | 1.03μΩ-m |
Mechanical Properties of Nickel 600 Alloy
| Properties | Metric | Imperial |
|---|---|---|
| Tensile Strength, Ultimate | 655 MPa | 95000 psi |
| Tensile Strength, Yield | 310 MPa | 45000 psi |
| Elongation at Break | 45% | 45% |
Advantages of Inconel 600
Corrosion Resistance
The excellent corrosion resistance of Inconel 600 tubing is one of the reasons it has become a standard material in various industries. The high chromium content (approximately 14-17%) of this alloy gives it excellent oxidation resistance at high temperatures and in corrosive solutions. The chromium in the material also makes it resistant to corrosion from sulfate-based chemicals. The high nickel content of the material gives it good resistance to reducing environments and alkaline solutions. Another significant advantage of this alloy is its high nickel concentration. A prominent problem with austenitic chromium-nickel stainless steels is stress corrosion cracking, which occurs when exposed to substances such as chlorides.
Heat Treatment of the Alloy
Inconel 600 alloy can be hot-worked and cold-worked. While cold working hardens the material and increases its strength, a variety of mechanical properties can be achieved by combining cold and hot working. The heat treatment method primarily depends on the desired properties. For example, annealing at a temperature of approximately 1010°C for 15 minutes produces a ductile material with a fine-grained structure, which is often chosen for its better corrosion resistance, higher compressive strength, durability, and impact resistance. However, to achieve optimal creep strength and fracture strength, heat treatment is usually performed at a temperature of 1090°C to 1150°C for one to two hours, as this dissolves carbides and increases grain size.
Alloy 600 Applications

Nuclear power plants
Heat exchangers
Industrial chemical evaporators
Industrial acid and alkali equipment
Heat treatment furnace components
Afterburner components and other high-temperature components
Vacuum furnace fixtures
Phenol condensers
Chemical and food processing equipment
Paper mills and alkaline digesters
Vinyl chloride monomer production
Thermocouple sheaths in corrosive environments
Catalyst regenerators in petrochemical production
Why Choose Gnee as Your Nickel-Based Alloy Supplier
✅ Over 18 years of export experience, products sold to more than 80 countries
✅ Certified by ISO, SGS, and BV
✅ Global inventory of Inconel, Hastelloy, Incoloy, and Monel alloy tubing, plates, and bars
✅ Custom processing services available – including cutting, polishing, CNC machining, and packaging
✅ Fast delivery within 7-15 days, supported by global logistics partners
📦 Packaging and Shipping
All stainless steel products are packaged using the following methods:
Wooden pallets or crates
Moisture-proof packaging
Labels with furnace number, standard, and size labels
Shipped worldwide by sea, air, or express
Gnee Steel is a supplier of Inconel 600 alloy, offering a wide range of products including: seamless pipe (sizes: 4-219 mm; thickness: 0.5-20 mm); welded pipe (sizes: 5.0-1219.2 mm; thickness: 0.5-20 mm); plates (thickness: 0.1 to 100 mm; width: 10-2500 mm); strips; alloy round bars (diameter: 3-800 mm); flat bars (thickness: 2-100 mm; width: 10-500 mm); hexagonal bars (size: 2-100 mm); wire rods; and extruded profiles. We collaborate with steel mills to provide our customers with Inconel 600 alloy products that meet or exceed numerous leading industry standards, including ASTM, ASME, SAE, AMS, ISO, DIN, EN, and BS standards.
Gnee Steel stocks and sells Inconel 600, pipes, plates, strips, round bars, flat bars, forged billets, hexagonal steel, wire rods, and extruded profiles. Please feel free to contact us at ss@gneesteel.com for a quote.






