Dec 18, 2024 Leave a message

Datasheet-For-Inconel-600-1-7-(1)-1-6.pdf

Inconel Alloy 600 V S Incoloy Alloy 800

Inconel 600 and Incoloy 800 are solid solution strengthened alloys, in which the only solid solution strengthening elements are chromium and iron.
In solid solution strengthened alloys, the solid solution strengthening elements enter the austenite matrix by dissolution. Therefore, the content of austenite in the alloy is an important factor affecting the strengthening effect. The higher the nickel content, the more austenite structure in the alloy.
More iron is added to Incoloy 800 to save costs. In contrast, the nickel content of Incoloy 800 is lower than that of Inconel 600. The lower nickel content will inevitably lead to a decrease in the corrosion resistance of the material.
To reduce this effect, Incoloy 800 adds more chromium to improve the resistance of the material to oxidation. Incoloy 800 also contains some aluminum, which further enhances its high temperature corrosion resistance.
Overall, the oxidation resistance of Inconel 600 is better than that of Incoloy 800.
Therefore, in general, the mechanical properties of Inconel 600 are better than those of Incoloy 800.
Inconel 600 and Incoloy 800 are both commonly used high temperature alloys, and their performance is similar. However, the performance of Inconel 600 is better than Incoloy 800 in all aspects. In comparison, Incoloy 800 is cheaper and can replace Inconel 600 in some applications.

 

Nickel-based alloy supplier-GNEE

Main standards:

inconel alloy 600
Condenser and heat exchanger tubes: ASTM B163
Seamless pipe and tube: ASTM B167, ASTM B829
Welded pipe: ASTM B517, ASTM B775
Welded pipe: ASTM B516, ASTM B751
Welded fittings: ASTM B366
Bars, bars and wire: ASTM B166
Forgings: ASTM B564
Plate, sheet and strip: ASTM B168, ASTM B906

 

incoloy 800
Condenser and heat exchanger tubes: ASTM B163
Seamless pipes and tubes: ASTM B407, ASTMB829
Welded pipes: ASTM B514, ASTM B775
Welded pipes: ASTM B515, ASTM B751
Welded fittings: ASTM B366
Bars and bars: ASTM B408
Forgings: ASTM B564
Plate, sheet and strip: ASTM A240, ASTM A480. ASTM B409, ASTM B906

Nickel-based alloy supplier-GNEE

Send Inquiry

whatsapp

Phone

E-mail

Inquiry