what is inconel 718 astm standard?
Inconel 718 is a high-strength, corrosion-resistant nickel alloy that typically conforms to ASTM standards, such as ASTM B637 (for bars, forgings, and billets), ASTM B670 (for strip), and ASTM A637/A637M. These specifications ensure that it meets requirements for strength, hardness, and stress rupture at extreme temperatures, covering various forms including bars, plates, and strips.
What are the AMS standards for INCONEL 718?
Nickel alloy 718 (commonly known as Inconel® 718) is a precipitation-hardenable, corrosion-resistant, and heat-resistant nickel alloy available in various forms including bars, forgings, plates, and sheets. AMS 5662 and AMS 5663 standards specify a maximum parallel side dimension of 10 inches and a maximum cross-sectional area of 78 square inches for bars and finished forgings.
Inconel 718 Specific heat
The specific heat of Inconel 718 alloy at room temperature (approximately 21°C/70°F) is approximately 435 J/kg·K (or 0.104 Btu/lb·°F) for annealed material, but it varies with temperature and heat treatment. At higher temperatures, its specific heat value fluctuates due to phase transformations, typically within the range of 760-1180 K (1300-1880°F).
Inconel 718 Specification
| Standard | Inconel 718 |
|---|---|
| UNS | N07718 |
| Werkstoff Nr. | 2.4668 |
| Form | Standard |
|---|---|
| Metal Type | UNS N07718 |
| Bar | ASTM B637 AMS 5662 AMS 5663 AMS 5664 PWA 1009 PWA 1010 GE B50TF15 |
| Wire | AMS 5832 |
| Sheet | ASTM B670 AMS 5596 AMS 5597 PWA 1033 GE B50TF14 ASTM B670 ASTM B637 |
| Plate | ASTM B670 AMS 5596 AMS 5597 PWA 1033 GE B50TF15 ASTM B670 ASTM B637 |
| Tube | AMS 5589 AMS 5590 |
| Pipe | AMS 5589 AMS 5590 |
| Forging | ASTM B637 AMS 5562 AMS 5663 AMS 5664 PWA 1009 PWA 1010 GE B50TF15 |
| Weld Wire | A5.14 ERNiFeCr-2 |
| Din | 2.4668 |
Inconel Alloy 718 Price
Price of Inconel 718 Seamless Pipe : $ 33500 ~ $ 35000 USD/Ton
Price of Inconel 718 ERW/Welded Pipe : $ 32500 ~ $ 34000 USD/Ton
Inconel Alloy 718 Application
Chemical, Petrolium & fertilizer Industry
Aerospace Industry
Nuclear reactors
Alloy 718 Chemical Element
| Inconel 718 | |
| Ni | 50 – 55 |
| Fe | Bal |
| Cr | 17 – 21 |
| Cu | 0.3 max |
| Mo | 2.8 – 3.3 |
| Nb | 4.75 – 5.5 |
| C | 0.08 max |
| Mn | 0.35 max |
| P | 0.015 max |
| S | 0.015 max |
| Si | 0.35 max |
Inconel 718 Mechanical Strength
| Density | 8.2 g/cm3 |
| Melting Point | 1350 °C (2460 °F) |
| Tensile Strength | Psi – 135,000 , MPa – 930 |
| Yield Strength (0.2%Offset) | Psi – 70,000 , MPa – 482 |
| Elongation | 45 % |
Inconel 718 suppliers
At GNEE, Inconel 718 is available in various forms to meet diverse industrial needs:
Plates and Sheets (cold rolled and hot rolled)
Bars and Rods (round, square, hexagonal)
Tubes (seamless and welded)
Wires and Strips (for springs, fasteners, electrical applications)
Forgings and Custom Parts (according to drawings or specifications)
Specifications: UNS NO7718, WNR 2.4668, AFNOR NC19FeNb, JIS NCF 718, GOST ХН75МБТЮ, EURONORM NiCr22Mo9Nb, OR ЭИ602, BS NA 21.
Temperature Range: -423°F to 1300°F.
Testing and Documentation: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Testing Reports, Non-Destructive Testing Reports, PMI Test Reports, Visual Inspection Reports, Third-Party Inspection Reports, NABL Certified Laboratory Reports.
Packaging: Wooden crates, bubble wrap, steel strapping, or packaged according to customer requirements.









