Dec 22, 2025 Leave a message

astm-b444-(1)-(1).pdf

inconel 625 vs inconel 718:machinability

For purchasing managers and project engineers, machinability directly impacts total project costs, not just raw material prices. Poor machinability can lead to: higher processing times and labor costs, higher tool wear and replacement frequency, lower production yields and longer lead times, and a higher risk of dimensional non-conformity.
When choosing between Inconel 625 and Inconel 718, understanding their differences in machinability is crucial for cost control, scheduling, and supplier selection.

 

what Is Inconel 625 alloy?

Inconel 625 (UNS N06625) is a high-strength, corrosion-resistant nickel-chromium-molybdenum superalloy that exhibits exceptional performance under extreme conditions, from cryogenic temperatures to 1800°F (982°C). Its primary strength derives from the molybdenum and niobium elements, making it crucial in fields such as marine, aerospace (jet engines), chemical processing, and nuclear energy.

 

 

What is 718 inconel ?

Inconel 718 (UNS N07718) is a high-strength, nickel-chromium superalloy known for excellent mechanical properties, corrosion resistance, and weldability, performing well from cryogenic temperatures up to around 1300°F (704°C). It's precipitation-hardenable and widely used in demanding aerospace (jet engines, rockets), gas turbines, and nuclear applications for parts like fasteners, rings, and structural component

 

inconel 625 vs inconel 718:What are the differences?

Alloy Strengthening Mechanism Machining Impact
Inconel 625 Solid-solution strengthened More ductile, relatively easier to machine
Inconel 718 Precipitation-hardened (γ′/γ″) Much harder, more abrasive to cutting tools

 

Inconel 625 vs. Inconel 718: Chemical Composition Comparison (wt.%)

Element Inconel 625 (UNS N06625) Inconel 718 (UNS N07718)
Nickel (Ni) ≥ 58.0 50.0 – 55.0
Chromium (Cr) 20.0 – 23.0 17.0 – 21.0
Molybdenum (Mo) 8.0 – 10.0 2.8 – 3.3
Niobium + Tantalum (Nb + Ta) 3.15 – 4.15 4.75 – 5.50
Iron (Fe) ≤ 5.0 Balance
Cobalt (Co) ≤ 1.0 ≤ 1.0
Aluminum (Al) ≤ 0.40 0.20 – 0.80
Titanium (Ti) ≤ 0.40 0.65 – 1.15
Carbon (C) ≤ 0.10 ≤ 0.08

 

 Inconel 625 vs. Inconel 718: Mechanical Properties 

Property Inconel 625 Inconel 718 (Aged)
Yield Strength ≥ 345 MPa ≥ 1,000 MPa
Tensile Strength ≥ 760 MPa 1,300–1,450 MPa
Hardness ≤ 220 HB 330–420 HB
Work Hardening Rate High Very high

 

Inconel 625 vs. Inconel 718 – Corrosion Resistance
Inconel 625 provides superior corrosion resistance, especially in chloride-rich, marine, and acidic environments, due to its high nickel (>58%), molybdenum (~9%), and chromium (~21%) content, while Inconel 718 prioritizes strength and shows good but comparatively lower resistance to pitting and stress corrosion cracking in aggressive chemical media.

 

Inconel 625 vs. Inconel 718 – High-Temperature Performance
Inconel 718 is designed for high-temperature strength, retaining excellent mechanical properties up to ~650–700°C through precipitation hardening (γ′/γ″), whereas Inconel 625 maintains stable corrosion resistance and usable strength up to ~980°C, making it better for high-temperature corrosion rather than peak strength applications.

 

Inconel 625 vs. Inconel 718 – Hardness
Inconel 718 achieves significantly higher hardness (typically 330–420 HB after aging) compared with Inconel 625 at ~200–240 HB in the annealed condition, reflecting 718's role in high-load structural components versus 625's focus on corrosion and fatigue resistance.

 

Inconel 718 suppliers

 

At GNEE, Inconel 718 is available in various forms to meet diverse industrial needs:
Plates and Sheets (cold rolled and hot rolled)
Bars and Rods (round, square, hexagonal)
Tubes (seamless and welded)
Wires and Strips (for springs, fasteners, electrical applications)
Forgings and Custom Parts (according to drawings or specifications)
Specifications: UNS NO7718, WNR 2.4668, AFNOR NC19FeNb, JIS NCF 718, GOST ХН75МБТЮ, EURONORM NiCr22Mo9Nb, OR ЭИ602, BS NA 21.
Temperature Range: -423°F to 1300°F.
Testing and Documentation: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Testing Reports, Non-Destructive Testing Reports, PMI Test Reports, Visual Inspection Reports, Third-Party Inspection Reports, NABL Certified Laboratory Reports.
Packaging: Wooden crates, bubble wrap, steel strapping, or packaged according to customer requirements.

Inconel 718 round bar
Inconel 718 round bar
Inconel 718 round pipe
Inconel 718 round pipe
Inconel 718 alloy plate
Inconel 718 alloy plate
Inconel 718 spring
Inconel 718 spring
 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry