What is Inconel 625 Grade 1 alloy?
Inconel 625 is a high-strength, corrosion-resistant nickel-chromium superalloy that resists pitting, crevice corrosion, and chloride stress corrosion cracking, making it suitable for marine, aerospace, and chemical processing applications. "Grade 1" typically refers to a specific annealing condition (e.g., annealing at a minimum of 1600°F) that conforms to ASTM B446 standards, which differs from the higher annealing temperature (2000°F) of Grade 2.
What is Inconel 625 Grade 2?
IInconel 625 Grade 2 is a high-performance nickel-chromium-molybdenum alloy that differs from Grade 1 in its higher solution annealing temperature (approximately 2000°F/1093°C), which enhances creep resistance and high-temperature performance. This makes it ideal for marine, aerospace (jet engines), and chemical processing applications requiring long-term resistance to harsh, corrosive, and high-temperature environments, and it is also resistant to pitting corrosion, crevice corrosion, and hydrogen embrittlement.
Inconel 625 Grade 1 vs. Grade 2: Differences
Inconel 625 Plate Mechanical Behavior
| Grade | Product | Tensile Strength min, psi (MPa) |
Yield Strength 0.2 % Offset, min, psi (MPa) |
Elonga tion in 2 in. or 50 mm, min, % |
|
| Grade1 | annealed | Cold-rolled sheet and strip | 120(827) | 60(414) | 30 |
| Hot-rolled sheet and hot-rolled plate up to 2.75 in. (70 mm), incl | 110(758) | 55(379) | 30 | ||
| Cold-rolled plate up to 0.375 in. (9.5 mm), incl | 110(758) | 55(379) | 30 | ||
| Grade2 | solution annealed | Cold-rolled sheet and strip, hot-rolled sheet, cold-rolled plate, and hot-rolled plate | 100(690) | 40(276) | 30 |
Heat Treatment Differences:
Inconel 625 Grade 1: Typically undergoes solution annealing at temperatures around 1,600°F (approximately 871°C). Grade 1 is a better choice for corrosive environments.
Inconel 625 Grade 2: Requires solution annealing at higher temperatures, approximately 2,000°F (about 1,093°C). Grade 2 has better high-temperature stability and strength.
Main Applications:
Inconel 625 Grade 1: Grade 1 is often chosen for applications where exceptional corrosion resistance is vital, especially in marine environments or situations involving chloride exposure. It is commonly used in the petrochemical industry, offshore, and aerospace sectors.
Inconel 625 Grade 2: Grade 2 shines in high-temperature applications. Its focus lies in maintaining strength and creep resistance at elevated temperatures. Therefore, it is preferred in applications such as gas turbine engine components, industrial furnaces, and high-temperature heat exchangers.
Inconel 625 suppliers
At GNEE, Inconel 625 is available in various forms to meet diverse industrial needs:
Plates and Sheets (cold rolled and hot rolled)
Bars and Rods (round, square, hexagonal)
Tubes (seamless and welded)
Wires and Strips (for springs, fasteners, electrical applications)
Forgings and Custom Parts (according to drawings or specifications)
Testing and Documentation: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, Destructive Testing Reports, Non-Destructive Testing Reports, PMI Test Reports, Visual Inspection Reports, Third-Party Inspection Reports, NABL Certified Laboratory Reports.
Packaging: Wooden crates, bubble wrap, steel strapping, or packaged according to customer requirements.









