Alloy 625 (UNS N06625) Overview
Alloy 625 (UNS N06625, W.Nr. 2.4856) is a nickel-chromium-molybdenum-niobium superalloy developed for severe corrosion service and high-temperature duty. Nickel forms the balance of the composition, chromium supplies the passive oxide film that resists oxidation, and molybdenum together with niobium delivers strong solid-solution strengthening. Because the alloy derives most of its strength from elements held in solid solution rather than from a precipitation treatment, it keeps useful strength across an exceptionally wide temperature range and remains readily weldable.
Typical Chemical Composition
| Element | Typical range (%) |
|---|---|
| Nickel (Ni) | Balance, 58.0 min |
| Chromium (Cr) | 20.0 - 23.0 |
| Molybdenum (Mo) | 8.0 - 10.0 |
| Niobium plus Tantalum (Nb+Ta) | 3.15 - 4.15 |
| Iron (Fe) | 5.0 max |
| Carbon (C) | 0.10 max |
| Manganese (Mn) | 0.50 max |
| Silicon (Si) | 0.50 max |
| Phosphorus (P) and Sulfur (S) | 0.015 max each |
The niobium addition is the decisive difference from simple nickel-chromium alloys: it strengthens the solid solution and raises yield strength and creep resistance without an ageing treatment, so the alloy can be supplied annealed and still carry load at elevated temperature.
Performance Characteristics
Corrosion resistance: Outstanding behaviour in both oxidising and reducing environments, including inorganic acids, alkaline solutions, seawater and salt spray. Its resistance exceeds that of most stainless steels and of many other nickel alloys in mixed-acid service.
Chloride resistance: High resistance to pitting, crevice corrosion and intergranular corrosion, which makes the alloy suitable for chloride-bearing process streams, marine atmospheres and desalination equipment.
High-temperature stability: Mechanical properties are retained from cryogenic temperatures up to roughly 980 degrees C, with good oxidation resistance in continuous service.
Strength, ductility and toughness: The alloy keeps high tensile and fatigue strength while retaining enough ductility to survive pressure surges, thermal cycling and mechanical impact.
Fabrication: Easily hot and cold worked, machined and welded. Gas tungsten arc and gas metal arc welding with ERNiCrMo-3 filler gives sound joints, and no post-weld heat treatment is needed to restore corrosion resistance.
Applications by Industry
Aerospace: Combustion chambers, exhaust nozzles, ducting, thrust reverser components, fasteners and connectors, where high-temperature stability and corrosion resistance are both required.
Chemical processing: Reactors, heat exchangers, columns, piping, valves and scrubbers handling hot, high-pressure and highly corrosive media.
Nuclear energy: Reactor internals, control rod drive components and fuel handling equipment requiring long-term corrosion resistance.
Oil and gas: Downhole tubing, wellhead components, subsea hardware and sour-service equipment.
Product Forms and Applicable Standards
| Product form | Common specification |
|---|---|
| Plate, sheet and strip | ASTM B443 / ASME SB443 |
| Seamless pipe and tube | ASTM B444 / ASME SB444 |
| Welded pipe and tube | ASTM B704 and B705 / ASME SB704 and SB705 |
| Rod, bar and wire | ASTM B446 / ASME SB446 |
| Forgings and forging stock | ASTM B564 / ASME SB564 |
The equivalent European designation is W.Nr. 2.4856 under DIN and EN practice. When ordering, state the product form, the ASTM or ASME specification, the delivery condition such as annealed or cold worked, and the required mechanical properties so that the mill certificate can be verified against the purchase order.
Selection and Fabrication Notes
Alloy 625 is normally selected when one material must survive both a corrosive medium and elevated temperature. Cold working raises strength but lowers ductility, so cold-worked tube and strip are specified only where extra strength is essential. Machining needs sharp tooling and heavy continuous feeds, and pickling after welding restores the chromium oxide film on the weld and heat-affected zone.
Frequently Asked Questions
Q: What is Alloy 625 made of?
It is a nickel-based alloy with roughly 58 percent or more nickel, 20 to 23 percent chromium, 8 to 10 percent molybdenum and 3.15 to 4.15 percent niobium plus tantalum, with the balance iron and minor elements.
Q: Is Alloy 625 the same as UNS N06625?
Yes. Alloy 625 is the common trade name and UNS N06625 is the unified numbering system designation for the same material; the European equivalent is W.Nr. 2.4856.
Q: What is the maximum service temperature of Alloy 625?
Mechanical properties are retained from cryogenic temperatures up to about 980 degrees C, although the exact limit depends on stress level, atmosphere and required design life.
Q: Can Alloy 625 be welded?
Yes. It is welded by gas tungsten arc, gas metal arc and shielded metal arc processes using matching nickel-chromium-molybdenum filler, and post-weld heat treatment is not required.
Q: Is Alloy 625 magnetic?
The alloy is essentially non-magnetic at room temperature in the annealed condition, which suits it to instruments and equipment sensitive to stray magnetic fields.
Q: Which industries use Alloy 625 most?
Aerospace, chemical processing, nuclear energy, oil and gas, marine engineering and pharmaceutical manufacturing are the largest users because all of them combine corrosive media with high temperature.





