1. Factors Influencing SCC Susceptibility in Chloride Environments
(1) Temperature
Below 100°C: SCC risk is relatively low
100–200°C: Risk increases, especially in concentrated chloride solutions
Above 200°C: High susceptibility to chloride SCC
300–700°C: Highest risk due to sensitization and aggressive chloride attack
(2) Chloride Concentration
Low concentrations (e.g., < 100 ppm): SCC possible but less likely
High concentrations (e.g., seawater, brines, process streams with > 1000 ppm Cl⁻): Significant SCC risk
Presence of chlorides + oxygen: Synergistically increases cracking susceptibility
(3) Stress Level
Residual stresses from welding or cold working are major contributors
Applied tensile stress (e.g., from pressure, thermal expansion restraint) accelerates crack growth
High stress + high temperature + chlorides = highest risk combination
(4) Material Condition
Solution‑annealed (SA) condition: Better SCC resistance
Cold‑worked material: Higher tensile strength but increased SCC susceptibility
Sensitized material (heated between 600–700°C): Very high IGSCC risk
2. Typical Environments Where Chloride SCC Occurs
Seawater and marine environments
Brines (oilfield, chemical processing)
Cooling water systems with chloride‑based inhibitors
Wastewater treatment plants
Chemical process streams containing NaCl, KCl, CaCl₂, MgCl₂
High‑temperature chloride salts (e.g., in heat treatment furnaces)
3. Case Studies and Industry Experience
Inconel 600 has experienced chloride SCC in various industries, including:
Oil and gas: Downhole tubulars and valves exposed to brines
Chemical processing: Reactors and heat exchangers handling chloride‑containing fluids
Power generation: Cooling water systems with chlorinated water
Nuclear industry: Steam generator tubing (primarily in high‑temperature water, but chloride contamination increases risk)




4. Prevention and Mitigation Strategies
To reduce chloride SCC in Inconel 600, the following measures are recommended:
Limit chloride concentration in process or cooling water
Avoid oxygen contamination in chloride‑containing systems
Minimize residual stresses through proper welding and stress relief
Use low‑heat‑input welding to avoid sensitization
Avoid cold working in chloride‑prone environments
Select alternative alloys with better chloride SCC resistance if necessary (e.g., Inconel 625, Hastelloy C‑276)
Apply corrosion inhibitors (e.g., nitrates, chromates - though chromates are environmentally restricted)
Regular inspection (UT, ECT, RT) to detect early cracking
5. Conclusion
In summary:
Inconel 600 is susceptible to stress corrosion cracking in chloride‑containing environments, especially at temperatures above 200°C and in the presence of tensile stress and oxygen.
The primary cracking mechanisms include film breakdown, pit initiation, hydrogen involvement, and intergranular attack.
Factors such as temperature, chloride concentration, stress level, and material condition significantly influence SCC risk.
Proper design, material selection, welding practices, and environmental control can mitigate SCC and ensure reliable performance.





