Two Alloys, Two Metallurgical Strategies
nickel alloy UNS N06625 (UNS N06625) and nickel alloy UNS N07718 (UNS N07718) are both high-performance nickel-based superalloys, but they are engineered for fundamentally different performance peaks, and this difference dictates how each behaves in sheet metal fabrication for exhaust systems and combustors. nickel alloy UNS N06625 is a solid-solution strengthened nickel-chromium-molybdenum alloy with niobium, whose strength comes from the stiffening effect of molybdenum and niobium in the matrix plus secondary carbide precipitation. Its signature property is exceptional, broad-spectrum corrosion resistance, including pitting, crevice corrosion, chloride-induced stress corrosion cracking, and oxidation resistance up to about 1800 degF (980 degC). nickel alloy UNS N07718 is a precipitation-hardenable nickel-chromium alloy containing significant niobium, molybdenum, titanium, and aluminum; its exceptional strength comes from the coherent gamma double-prime phase formed during a two-stage aging heat treatment, giving the highest tensile and yield strength of this alloy group at temperatures up to about 1300 degF (700 degC), along with excellent creep and fatigue resistance.
Forming: Work Hardening versus Age Hardening
The two alloys demand different forming strategies. nickel alloy UNS N06625 has a rapid work-hardening rate: it becomes progressively harder and stronger as it is deformed, so forming requires higher press capacities. Complex shapes are often hot formed to reduce required force and minimize springback, and for cold forming, generous bend radii are needed, with intermediate annealing between severe forming steps to restore ductility. nickel alloy UNS N07718 is always formed in the soft, solution-annealed condition, in which it remains formable, although it still work-hardens during deformation. All forming and machining are completed before the final aging heat treatment, so designers must account for the potential distortion and dimensional change that the aging cycle can introduce, which can be significant for complex parts.
Welding: Cleanliness versus Strain-Age Cracking
nickel alloy UNS N06625 is considered one of the most weldable of the high-performance nickel alloys. Because it is solid-solution strengthened, the weld metal and heat-affected zone retain good ductility and corrosion resistance, and the primary concerns are cleanliness and heat input control to avoid secondary phase precipitation. nickel alloy UNS N07718 is a different matter: welding is a high-risk operation because the heat-affected zone, heated into the aging temperature range, can harden and become brittle while weld shrinkage imposes tensile strain, producing strain-age cracking. The critical practices for 718 are a qualified procedure with very low heat input, matching or compatible filler such as ERNiFeCr-2 for 718 or ERNiCrMo-3 (625 filler), and post-weld heat treatment, which for critical parts is a full re-solution and age and for less critical welds may be a direct age. For both alloys, joint surfaces must be free of grease, oil, paint, and sulfur- or lead-bearing contaminants, and tools dedicated to nickel alloys must be used to avoid iron contamination.
Related Alloys for Specific High-Temperature Roles
Furnace components and heat treatment fixtures prioritize long-term stability against oxidation, carburization, and cyclic thermal stress over maximum tensile strength. nickel alloy UNS N06601 (UNS N06601) carries about 23% chromium plus roughly 1.4% aluminum, forming an exceptionally stable, adherent, self-healing alumina scale beneath the primary chromia scale, giving outstanding oxidation and carburization resistance in furnace service, with resistance to thermal fatigue; it is used for radiant tubes, muffles, retorts, belt furnace belts, and thermocouple sheaths. nickel alloy UNS N07750 (UNS N07750) is a precipitation-hardenable alloy optimized for high-temperature relaxation resistance, making it the standard for springs, bolts, and fasteners in furnace hot zones where maintained load is critical, with good strength and oxidation resistance up to about 1300 degF (700 degC). nickel-based alloy 690 (UNS N06690), with roughly 29% chromium, was developed to solve primary water stress corrosion cracking (PWSCC) in pressurized water reactors and is the global standard for new steam generator tubing and divider plates, with excellent resistance to nitric acid and oxidizing salts supporting its use in fuel reprocessing. The general selection rule remains: choose 718 when the design driver is extreme mechanical load at high temperature, and 625 when the design driver is survival in a complex, aggressive chemical environment.
Aerospace-Grade 718 Plate: Beyond Standard ASTM
High-quality aerospace-grade nickel alloy UNS N07718 plate is produced to stringent Aerospace Material Specifications such as AMS 5596, which go well beyond standard ASTM requirements. These include tighter compositional limits on major and trace elements, double vacuum melting practice (vacuum induction melting followed by consumable electrode vacuum remelting) to minimize non-metallic inclusions and gas content, guaranteed mechanical properties in the solution-treated and aged condition with testing that includes elevated-temperature tensile, stress rupture, and creep, 100% ultrasonic inspection per ASTM A578 to a specified acceptance level, microstructural controls such as grain size range and freedom from continuous grain boundary precipitates, and full traceability of each plate to its heat and melt practice through a comprehensive material test report.
Frequently Asked Questions
Why is nickel alloy UNS N06625 easier to weld than nickel alloy UNS N07718? 625 is solid-solution strengthened, so the weld and heat-affected zone keep good ductility and corrosion resistance. 718 is age-hardenable, so the heat-affected zone can harden and become brittle during welding and then crack as weld shrinkage pulls on it, a failure known as strain-age cracking.
Which filler metal is used for welding nickel alloy UNS N07718? Matching filler ERNiFeCr-2 is standard, and ERNiCrMo-3 (625 filler) is also used. Very low heat input, a qualified procedure, and post-weld heat treatment, typically re-solution plus age for critical parts, are required.
Should nickel alloy UNS N07718 be aged before or after forming? after. Forming and machining are done in the soft solution-annealed condition, and the final aging heat treatment is performed afterwards. Designers must allow for distortion and dimensional change during aging.
Why does nickel alloy UNS N06625 need larger forming forces than expected? 625 work-hardens rapidly during deformation, so it becomes progressively harder and stronger as it is formed. Higher press capacities, hot forming for complex shapes, generous bend radii, and intermediate annealing between severe steps are the standard responses.
Is nickel alloy UNS N07718 suitable for furnace fixtures and springs? For springs and fasteners that must hold load at temperature, nickel alloy UNS N07750 is usually the better choice because of its high-temperature relaxation resistance. 718's aging response can also be degraded by prolonged furnace exposure, so it is generally not the first choice for hot-zone fixtures.
What makes nickel-based alloy 690 unique in the nuclear industry? Its roughly 29% chromium content makes it highly resistant to primary water stress corrosion cracking, which is why it has replaced nickel alloy UNS N06600 as the global standard material for PWR steam generator tubing and divider plates.





