1. Chemical Composition (Core Distinction)
101 Copper: Classified as oxygen-free copper (OFC), it has a minimum copper (Cu) content of 99.99%. It contains extremely low levels of impurities (e.g., iron, lead, zinc, sulfur) and virtually no oxygen (oxygen content ≤ 0.001%).
110 Copper: Known as electrolytic tough pitch (ETP) copper, it has a minimum copper content of 99.90%. It contains slightly higher impurities than 101 copper and includes a small amount of oxygen (oxygen content 0.02–0.05%), which forms copper oxide (Cu₂O) particles in the microstructure.
2. Manufacturing Process
101 Copper: Produced via a vacuum or inert gas protection smelting process. This method prevents oxygen from dissolving in the molten copper, ensuring ultra-low oxygen content and high purity.
110 Copper: Manufactured through electrolytic refining followed by air melting. Oxygen is intentionally added during melting to react with impurities (e.g., hydrogen), which are then removed as oxides-improving casting quality but leaving residual oxygen.
3. Mechanical and Physical Properties
4. Key Performance Limitations
101 Copper: Limited by higher production costs due to specialized smelting. It also has lower machinability than 110 copper (pure copper is "gummy" and prone to tool adhesion).
110 Copper: Susceptible to hydrogen embrittlement in high-temperature hydrogen-rich environments. Impurities and oxygen can slightly degrade performance in ultra-precise electrical or thermal applications.




5. Typical Applications
101 Copper: Used in high-performance scenarios requiring maximum conductivity, purity, or resistance to hydrogen:
High-frequency electrical components (e.g., RF connectors, coaxial cables).
Vacuum tubes, semiconductors, and electronic vacuum devices.
Heat exchangers, cryogenic equipment, and hydrogen processing systems.
Aerospace and military electronics (critical for reliability).
110 Copper: The most common general-purpose copper grade for cost-effective, non-specialized needs:
Electrical wiring, cables, and bus bars (building and industrial power distribution).
Plumbing pipes, fittings, and HVAC components.
Sheet metal, stampings, and general fabrications (e.g., hardware, decorative parts).
Welding electrodes and electrical contacts (non-high-frequency).
6. Cost Comparison
101 Copper: 20–50% more expensive than 110 copper, due to high-purity raw materials and vacuum/inert gas processing.
110 Copper: Cost-effective and widely available, making it the preferred choice for mass-produced, non-critical applications.





