Dec 02, 2025 Leave a message

Corrosion Resistance -Grade 1/Grade 2 Titanium

1. Corrosion Resistance Performance

Titanium Grade 1 and Grade 2 (commercially pure titanium, CP Ti) exhibit excellent overall corrosion resistance due to their dense, adherent, and self-healing titanium oxide (TiO₂) film formed spontaneously in most environments. Key performance characteristics include:

General Corrosion: Both grades resist uniform corrosion in neutral, slightly acidic, and slightly alkaline solutions (e.g., water, seawater, dilute acids like acetic acid, and weak bases like sodium hydroxide). Grade 1, with higher purity (minimum 99.5% Ti) and lower interstitial elements (Fe, C, N, O), offers marginally superior corrosion resistance than Grade 2 in mild corrosive environments.

Pitting & Crevice Corrosion: They are highly resistant to pitting and crevice corrosion in chloride-containing media (e.g., seawater, brines) and moist chlorine gas, as the oxide film remains stable even at elevated temperatures (up to ~120°C for continuous service).

Stress Corrosion Cracking (SCC): Immune to SCC in most common environments, including aqueous solutions, organic solvents, and atmospheric conditions.

Limitations: Susceptible to corrosion in strong reducing acids (e.g., concentrated hydrochloric acid, hydrofluoric acid) and hot concentrated sulfuric acid (above 100°C) without inhibitors, as these environments dissolve the oxide film. They also corrode in liquid metals (e.g., mercury) and some molten salts at high temperatures.

info-443-443info-446-442

info-446-442info-443-449

2. Suitable Corrosion Environments

Grade 1 and Grade 2 are widely used in environments requiring reliable corrosion resistance, including:

Marine & Offshore: Seawater immersion (hulls, heat exchangers, fasteners), offshore platforms (pipelines, valves), and desalination plants (reverse osmosis membranes, pressure vessels).

Chemical Processing: Handling of dilute acids (acetic, citric, phosphoric), alkalis (sodium hydroxide, ammonium hydroxide), organic solvents (methanol, ethanol, acetone), and chemical intermediates (esters, aldehydes).

Aerospace & Automotive: Atmospheric corrosion resistance for aircraft components (fasteners, hydraulic systems) and exhaust systems (automotive mufflers, catalytic converters) exposed to high humidity and mild chemicals.

Medical & Pharmaceutical: Biocompatible and corrosion-resistant for surgical implants (bone plates, screws) and pharmaceutical processing equipment (tanks, piping) where purity and non-toxicity are critical.

Food & Beverage: Processing of acidic foods (tomatoes, citrus fruits), beverages (soft drinks, beer), and food additives (vinegar, citric acid) due to non-reactivity and easy cleaning.

Water Treatment: Potable water pipelines, wastewater treatment plants (aeration systems, sludge handlers), and swimming pool equipment (resistant to chlorine and chloramines).

Key Note

Grade 1 is preferred for applications requiring higher ductility and slightly better corrosion resistance in mild environments, while Grade 2 (with higher strength from slightly higher interstitial content) is more cost-effective for general corrosion-resistant structural components. Both grades are not recommended for strong reducing acids or high-temperature molten salt environments without proper corrosion inhibitors or protective coatings.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry