Comparison of Monel Alloy 400 and Inconel Alloy 625

Comparison of Monel Alloy 400 and Inconel Alloy 625
Monel 400 and Incol 625 are both nickel-based alloys, but they differ significantly in composition, strength, heat resistance, and primary applications. Monel 400 is a nickel-copper alloy with excellent corrosion resistance, especially in saltwater and acidic environments, but it has lower strength and cannot be used above 540°C (1000°F). Incol 625 is a nickel-chromium-molybdenum-niobium alloy with superior strength, toughness, and high-temperature resistance, making it suitable for high-temperature applications such as jet engines.
What are the advantages of Inconel 625?
Inconel 625 alloy is an ideal choice for seawater applications because it possesses the following characteristics: it is not prone to localized corrosion (pitting and crevice corrosion), has high corrosion fatigue strength, high tensile strength, and is resistant to chloride stress corrosion cracking.

Chemical Composition and Mechanical Properties
The chemical composition of these alloys determines their performance characteristics. Alloy 400 is mainly composed of nickel (63-70%) and copper (28-34%), with small amounts of iron and manganese. Alloy 625 has a more complex composition, including nickel (minimum 58%), chromium (20-23%), molybdenum (8-10%), and niobium (3.15-4.15%).
| Ni | Cu | Cr | Mo | Nb | Fe | Mn | C | Si | S | Co | Others | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Alloy 400 |
63-70 |
28-34 |
– |
– |
– |
2.5 |
2.0 |
0.3 |
0.5 |
0.024 |
2.0 |
– |
| Alloy K500 |
58 min |
– |
20-23 |
8-10 |
3.15-4.15 |
5 |
0.5 |
0.1 |
0.5 |
0.015 |
1 |
0.865 |
These components lead to significant differences in their mechanical properties:
• Alloy 400 has a tensile strength of approximately 600 MPa and good ductility, making it tougher and more impact-resistant at room temperature.
• Alloy 625, due to the presence of niobium and molybdenum, exhibits higher tensile strength (830-1034 MPa) and yield strength. The niobium and molybdenum content also enhances its resistance to deformation under stress.
|
Alloy 400 |
Alloy 625 | ||
|---|---|---|---|
|
<55mm |
>55mm |
<100mm |
|
| 0.2% Proof Strength (MPa) |
415 |
170 |
415 |
| Tensile Strength (MPa) |
600 |
480 |
830-1034 |
| Elongation (%) |
20 |
35 |
30 |
| Hardness |
186-287HB |
35 HRC max |
|
Machinability and Formability
Machinability and formability are key considerations in material selection:
• Alloy 400 is easier to machine due to its good ductility and tensile strength, and has a wider hot working temperature range (650°C to 1175°C).
• Alloy 625 is more difficult to machine, but has superior mechanical properties and can withstand higher temperatures during hot working (980°C to 1175°C).
Corrosion Resistance
Both alloys are known for their corrosion resistance, but they perform well in different environments:
• Alloy 400's corrosion resistance stems from its high copper content, making it ideal for marine applications and other environments frequently exposed to seawater.
• Alloy 625 utilizes its chromium and molybdenum content to provide excellent corrosion resistance in oxidizing and corrosive environments, especially at high temperatures. This makes it suitable for high-temperature applications such as the chemical and power generation industries.
Application Areas
Due to their excellent performance, Alloy 400 and Alloy 625 are widely used in a variety of fields:
• Alloy 400 is commonly used in marine fittings, pump and valve components, propeller shafts, and electronic equipment.
• Alloy 625 is suitable for more demanding environments such as oil refining, power generation, pollution control, and waste treatment, where high strength and resistance to high-temperature corrosion are required.
Why Choose Gnee as Your Nickel-Based Alloy Supplier
✅ Over 18 years of export experience, products sold to more than 80 countries
✅ Certified by ISO, SGS, and BV
✅ Global inventory of Inconel, Hastelloy, Incoloy, and Monel alloy tubing, plates, and bars
✅ Custom processing services available – including cutting, polishing, CNC machining, and packaging
✅ Fast delivery within 7-15 days, supported by global logistics partners
📦 Packaging and Shipping
All stainless steel products are packaged using the following methods:
Wooden pallets or crates
Moisture-proof packaging
Labels with furnace number, standard, and size labels
Shipped worldwide by sea, air, or express
Gnee Steel is a supplier of Inconel 625 alloy, offering a wide range of products including: seamless pipe (sizes: 4-219 mm; thickness: 0.5-20 mm); welded pipe (sizes: 5.0-1219.2 mm; thickness: 0.5-20 mm); plates (thickness: 0.1 to 100 mm; width: 10-2500 mm); strips; alloy round bars (diameter: 3-800 mm); flat bars (thickness: 2-100 mm; width: 10-500 mm); hexagonal bars (size: 2-100 mm); wire rods; and extruded profiles. We collaborate with steel mills to provide our customers with Inconel 625 alloy products that meet or exceed numerous leading industry standards, including ASTM, ASME, SAE, AMS, ISO, DIN, EN, and BS standards.
Gnee Steel stocks and sells Inconel 625, pipes, plates, strips, round bars, flat bars, forged billets, hexagonal steel, wire rods, and extruded profiles. Please feel free to contact us at ss@gneesteel.com for a quote.








