Jan 29, 2026 Leave a message

Can Monel400 tolerate sulfur-containing chemical media for a long time

1.Performance in dry elemental sulfur and dry hydrogen sulfide
Monel 400 demonstrates excellent long‑term corrosion resistance in dry elemental sulfur and dry hydrogen sulfide gas at moderate and low temperatures. In the absence of water and moisture, sulfur and hydrogen sulfide are not sufficiently reactive to cause significant sulfidation or general corrosion of the nickel‑copper alloy. The alloy can maintain stable mechanical properties and corrosion resistance under long‑term exposure.
Performance in wet hydrogen sulfide and aqueous sulfide solutions
In environments containing both water and hydrogen sulfide, especially acidic wet H₂S systems (such as sour crude oil, sour natural gas, and acidic wastewater containing sulfide ions), Monel 400 faces two critical failure risks:
Sulfide stress cracking (SSC):Monel 400 is not a sulfide stress cracking‑resistant alloy standardized for sour service. Under the combined action of tensile stress and wet acidic hydrogen sulfide, it is prone to delayed brittle fracture, which makes it unsafe for long‑term use in pressurized sour water or sour gas systems with stress.
General corrosion and pitting:Although it is more corrosion‑resistant than carbon steel and some stainless steels, long‑term contact with acidic sulfide aqueous solutions will still cause slow uniform corrosion and local pitting corrosion. The corrosion rate will accelerate with increasing temperature and acidity.
2.Performance in sulfuric acid media
Monel 400 has very limited long‑term tolerance to sulfuric acid, one of the most common sulfur‑containing industrial chemicals.
In dilute sulfuric acid at room temperature, it shows moderate corrosion resistance for short periods, but long‑term exposure will lead to obvious corrosion, and the corrosion rate rises rapidly with increasing temperature and acid concentration.
In concentrated sulfuric acid, especially hot concentrated sulfuric acid, Monel 400 corrodes rapidly and cannot be used for long‑term service. It is not a recommended material for sulfuric acid handling equipment.
3.Performance in other sulfur‑containing organic media
In many sulfur‑containing organic solvents, hydrocarbons, and oils without free water and strong acidity, Monel 400 usually has acceptable long‑term corrosion resistance. However, if the medium contains hydrolyzable sulfur compounds that produce acidic substances, or if water accumulates during operation, the corrosion risk will increase significantly.
info-347-351info-347-348
info-347-348info-353-350
Conclusion
Monel 400 can be used for long‑term service in dry sulfur and dry hydrogen sulfide environments at moderate temperatures. However, it is not suitable for long‑term reliable use in wet acidic hydrogen sulfide systems (sour service) and sulfuric acid media, especially under temperature and pressure loading, due to the risks of sulfide stress cracking and accelerated corrosion. For long‑term exposure to aggressive sulfur‑containing chemical media, materials such as nickel‑molybdenum alloys or other dedicated sulfidation‑resistant alloys are typically more appropriate.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry