
A comprehensive comparison guide for Inconel 601 and Inconel 600
Inconel 601 is based on Inconel 600 but with the addition of aluminum, giving it superior high-temperature oxidation and carburization resistance, making it ideal for furnace and aerospace applications. Inconel 600, on the other hand, offers better resistance to chloride stress corrosion cracking, excellent overall corrosion resistance, and generally better weldability, making it suitable for applications in chemical processing, marine, and nuclear industries where extreme high temperatures are not the primary challenge. While both alloys exhibit excellent high-temperature strength, Inconel 601 performs better in applications involving spalling/thermal cycling issues.
What is Inconel 601 material?
INCONEL nickel-chromium-iron alloy 601 (UNS N06601/W.Nr. 2.4851) is a general-purpose engineering material suitable for applications requiring heat and corrosion resistance. A notable characteristic of Inconel 601 alloy is its excellent resistance to high-temperature oxidation.

What is Inconel 600?
Inconel 600 is a widely used nickel-chromium alloy known for its excellent oxidation and corrosion resistance over a wide temperature range. Engineers often choose this alloy because of its good stability and mechanical strength in harsh environments. Inconel 600's composition includes at least 72% nickel, 14-17% chromium, and 6-10% iron, along with small amounts of manganese, silicon, sulfur, carbon, and copper. This specific combination of elements gives Inconel 600 its unique properties, allowing it to resist carburization and scale formation at temperatures up to 1093°C (2000°F).
What is Inconel 601?
Inconel 601 builds upon Inconel 600 by increasing the chromium content and introducing aluminum into its composition. This adjustment enhances its high-temperature oxidation resistance and improves its ability to withstand thermal cycling. Even after prolonged exposure to temperatures as high as 1200°C (2200°F), this alloy maintains good mechanical strength and ductility.
Inconel Alloy 600 vs Alloy 601 Chemical Composition
| Element | Inconel 600 Composition (%) | Inconel 601 Composition (%) |
|---|---|---|
| Nickel (Ni) | ≥ 72.0 | 58.0 – 63.0 |
| Chromium (Cr) | 14.0 – 17.0 | 21.0 – 25.0 |
| Iron (Fe) | 6.0 – 10.0 | Remainder |
| Aluminum (Al) | ~0 | 1.0 – 1.7 |
| Carbon (C) | ≤ 0.10 | ≤ 0.10 |
| Manganese (Mn) | ≤ 1.00 | ≤ 1.00 |
| Silicon (Si) | ≤ 0.50 | ≤ 0.50 |
| Sulfur (S) | ≤ 0.015 | ≤ 0.015 |
| Copper (Cu) | ≤ 0.50 | ≤ 1.00 |
Inconel 600 vs Inconel 601 Physical Properties
| Property | Inconel 600 | Inconel 601 |
| Density | 8.47 g/cm³ | 8.11 g/cm³ |
| Melting Point | 1354-1413°C | 1365-1410°C |
| Thermal Conductivity | 14.9 W/m·K at 20°C | 13.3 W/m·K at 20°C |
| Tensile Strength | 550 MPa | 655 MPa |
| Yield Strength | 240 MPa | 310 MPa |
| Elongation | 30% | 33% |
As can be seen from the table, Inconel 601 alloy has slightly higher tensile strength and yield strength than Inconel 600 alloy, making it more durable under mechanical stress. Furthermore, although both alloys exhibit excellent high-temperature stability, the lower thermal conductivity and higher elongation of Inconel 601 alloy make it less prone to cracking under thermal cycling conditions.
Nickel 600 vs Nickel 601 Mechanical Properties
| Property | Inconel 600 | Inconel 601 |
| Tensile Strength | 550 MPa | 655 MPa |
| Yield Strength | 240 MPa | 310 MPa |
| Hardness (Rockwell B) | 88 | 95 |
| Elongation at Break | 30% | 33% |
| Creep Resistance | Good | Excellent |
Compared to Inconel alloy 600, Inconel alloy 601 exhibits superior tensile strength, yield strength, and hardness, indicating greater durability in high-stress applications. Furthermore, its excellent creep resistance makes it an ideal material for applications frequently exposed to high temperatures. The slightly higher elongation at break also suggests better flexibility under stress, thus reducing the likelihood of cracking.
Comparison of thermal properties of Inconel 601 and Inconel 600 alloys
| Property | Inconel 600 | Inconel 601 |
| Melting Point | 1354-1413°C | 1365-1410°C |
| Maximum Service Temperature | 1093°C | 1260°C |
| Thermal Conductivity | 14.9 W/m·K at 20°C | 13.3 W/m·K at 20°C |
| Thermal Expansion | 13.3 µm/m·°C at 20°C | 12.9 µm/m·°C at 20°C |
Comparison of applications of Inconel 601 and Inconel 600 alloys
| Application Area | Inconel 600 | Inconel 601 |
| Chemical Processing | Heat exchangers, evaporator tubes, reactor vessels | Furnace liners, catalyst support grids |
| Aerospace | Jet engine components, turbine blades | Combustion chambers, exhaust systems |
| Nuclear Industry | Reactor control rods, heat shields | Heat-treating baskets, nuclear reactor internals |
| Power Generation | Steam generators, boiler components | Heat recovery systems, gas turbine components |
| Petrochemical Industry | Ethylene production, petrochemical heaters | Radiant tubes, thermal reactors |
| Heat Treatment | Annealing and carburizing equipment | Furnace muffles, retorts, radiant tubes |
Surface Treatments and Value-Added Services Available for Inconel 601 and Inconel 600
Gnee Steel offers Inconel alloy products with various surface treatments to meet diverse application requirements. Common surface treatments include bright annealing, hot rolling, cold drawing, and polished surfaces. Value-added services include:
Cutting to specified lengths according to customer requirements
Precision machining
Heat treatment
Non-destructive testing
Third-party inspection (SGS, TÜV, Lloyd's Register)
Certifications such as ISO 9001:2015, EN 10204 3.1/3.2 MTC, and NACE MR0175 are available upon request. These services and surface treatments help ensure that Inconel 600 and Inconel 601 meet the highest quality and performance standards in demanding environments.
Why Choose Gnee as Your Nickel-Based Alloy Supplier
✅ Over 18 years of export experience, products sold to more than 80 countries
✅ Certified by ISO, SGS, and BV
✅ Global inventory of Inconel, Hastelloy, Incoloy, and Monel alloy tubing, plates, and bars
✅ Custom processing services available – including cutting, polishing, CNC machining, and packaging
✅ Fast delivery within 7-15 days, supported by global logistics partners
📦 Packaging and Shipping
All stainless steel products are packaged using the following methods:
Wooden pallets or crates
Moisture-proof packaging
Labels with furnace number, standard, and size labels
Shipped worldwide by sea, air, or express
Gnee Steel is a supplier of inconel 601 alloy, offering a wide range of products including: seamless pipe (sizes: 4-219 mm; thickness: 0.5-20 mm); welded pipe (sizes: 5.0-1219.2 mm; thickness: 0.5-20 mm); plates (thickness: 0.1 to 100 mm; width: 10-2500 mm); strips; alloy round bars (diameter: 3-800 mm); flat bars (thickness: 2-100 mm; width: 10-500 mm); hexagonal bars (size: 2-100 mm); wire rods; and extruded profiles. We collaborate with steel mills to provide our customers with inconel 601 alloy products that meet or exceed numerous leading industry standards, including ASTM, ASME, SAE, AMS, ISO, DIN, EN, and BS standards.
Gnee Steel stocks and sells inconel 601, pipes, plates, strips, round bars, flat bars, forged billets, hexagonal steel, wire rods, and extruded profiles. Please feel free to contact us at ss@gneesteel.com for a quote.






