Inconel Steel ASTM B670 718 Medium Alloy Plate
Specifications: ASTM / ASME SB 670
Dimensions: 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness: 0.1mm to 12 mm
Shapes: Coil, Foil, Coiled, Plain Sheet, Gasket Sheet, Strip, Flat, Blank (Round), Ring (Flange)
Surface Treatment: Hot Rolled (HR), Cold Rolled (CR), 2B, 2D, BA NO(8), Satin (Plastic Coated Metal)
Hardness: Soft, Hard, Semi-hard, Quarter Hard, Spring Hard, etc.
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
GNEE Inconel ASTM B670 718 Medium Alloy Plate introduce
Inconel Steel ASTM B670 718 Medium Plate


Inconel 718 polished plate manufactured to ASTM B670 is a premium nickel-chromium alloy plate with excellent mechanical properties and surface finish. Its material composition (Ni 50-55%, Chromium 17-21%, Niobium + Tantalum 4.75-5.5%) allows it to maintain excellent strength at high temperatures (up to 700°C/1300°F) while maintaining excellent corrosion resistance in oxidizing and reducing environments. Through precision cold rolling and mechanical polishing processes, these plates achieve an excellent surface finish (typically Ra ≤ 0.4μm), which improves aesthetics and functional performance by minimizing friction and particle adhesion. The plates are solution annealed (955-1010°C) and then double aged (718°C + 621°C) to obtain the best mechanical properties (typically tensile strength ≥ 1350 MPa, yield strength ≥ 1100 MPa). This combination of properties makes ASTM B670 Inconel 718 polished plate particularly suitable for critical aerospace components (engine cases, thrust reversers), high-performance chemical processing equipment (reactor vessels, heat exchangers), and medical implant manufacturing, where surface integrity and material reliability are critical. The polished surface also provides improved resistance to pitting and crevice corrosion in chloride-containing environments compared to standard mill surfaces.
GNEE Steel ASTM B670 718 Medium Alloy Plate Specification
Specification of ASTM B670 Inconel 718
| Grades | Inconel 718 (UNS No. N07718) |
| Standards | ASTM, ASME and API |
| Specifications | ASTM B 670 / ASME SB 670 |
| Range | 5 mm To 50 mm thick in 1000 mm TO 1250 mm width & 2500 mm Length. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
UNS N07718 Inconel 718 Plate Properties
Chemical Composition of ASTM B670 Alloy 718 Plate
Ni |
Cr | Fe | Mo | Nb+Ta | C | Mn | Si | Ph | S | Ti | Cu | B | Al | Co | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min | 50 | 17 | Bal | 2.8 | 4.75 | - | - | - | - | - | 0.65 | - | - | 0.20 | - |
| Max | 55 | 21 | - | 3.3 | 5.50 | 0.08 | 0.035 | 0.35 | 0.015 | 0.015 | 1.15 | 0.30 | 0.006 | 0.80 | 1.00 |
ASTM B670 Alloy 718 Plate Mechanical Properties in annealed condition
0.2% Proof Stress |
Tensile Strength | Elongation | |
|---|---|---|---|
| MPA | MPA | % | |
| Max | Max | Min | |
| Sheet and strip | 550 | 965 | 30 |
| Plate | 725 | 1035 | 30 |
GNEE Inconel ASTM B670 718 Medium Plate Schedule
Dimensions of Inconel 718 Plate
ASTM B670 Alloy 718 Plate Imperial Dimensions
| Plate Surface finish | Gauge (in) | Width (max in) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
| 2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
| BA Mexinox only | 18–28 | 48 |
| Polished plate (not brushed) | 11–24 | 60 |
| Temper rolled plate Mexinox only | 13–29 | 48 |
ASTM B670 718 Alloy Plate Metric Dimensions
| Plate Surface finish | Thickness (mm) | Width (max mm) |
|---|---|---|
| 2B – Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
| 2D – Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
| 2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
| 2H – Work hardened plate | 0.4–6.35 | 1524 |
| Polished, brushed plate | 0.5–4.0 | 1524 |
GNEE Group Factory Environment
GNEE Group ASTM B670 718 Medium Alloy Plate Factory Environment

GNEE Group Packaging
GNEE Group Steel ASTM B670 718 Medium Plate Packaging

GNEE Group Testing
GNEE Group ASTM B670 718 Medium Plate Testing

FAQ
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we have gained BV, SGS authentication.
Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.
Hot Tags: inconel steel astm b670 718 medium alloy plate, China inconel steel astm b670 718 medium alloy plate suppliers, inconel alloy for aerospace and automotive, Inconel 690 nickel alloy, inconel alloy for trays, inconel alloy storage, inconel alloy for hoses, Nickel Alloy 686
You Might Also Like
Send Inquiry















