Inconel Alloy UNS N06600 Metal Steel Pickling Plate
Width: 0.5-1.0 m
Thickness: 0.1-5.0 mm
Length: 0.7-6.0 m
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
GNEE Inconel UNS N06600 Metal Steel Pickling Plate introduce
Inconel Alloy UNS N06600 Steel Pickling Plate


Inconel 600 pickled plate is a nickel-chromium-iron high-temperature alloy (Ni≥72%, Cr14-17%, Fe6-10%). After hot rolling pickling (HRAP) treatment, the surface is uniformly matte (Ra 0.8-3.2μm), and has excellent high-temperature oxidation resistance and corrosion resistance. The material still maintains stable oxidation resistance at a high temperature of 1175℃, and shows good corrosion resistance to media such as nitric acid and caustic soda, especially effective in resisting chloride stress corrosion cracking. The pickling process removes the surface oxide layer, significantly improving the welding quality and subsequent processing performance. The plate has a tensile strength of 550-760MPa and an elongation of 30-45%, supporting conventional welding (TIG/MIG) and hot and cold forming processing. It is mainly used in high-temperature corrosion environments such as aerospace engine combustion chamber components, chemical heat treatment equipment, nuclear reactor internal components, and heating elements in the electronics industry. It is particularly suitable for the manufacture of pressure-bearing components that need to work in the temperature range of 540-1175℃ for a long time. Its balanced chemical composition and surface treatment characteristics make it an ideal solution for conditions where high temperature, corrosion and mechanical stresses work together.
GNEE Inconel Alloy UNS N06600 Metal Pickling Plate Specification Sheet
Inconel 600 Pickled Plate - Technical Specifications
| Category | Parameter | Specification |
|---|---|---|
| Standard Sizes | Thickness (mm) | 0.5-50 (Common: 1.0, 2.0, 3.0, 5.0, 10.0, 15.0, 20.0, 30.0) |
| Width (mm) | 600-2000 (Standard: 1000, 1219, 1500) | |
| Length (mm) | 1000-6000 (Custom up to 12000mm) | |
| International Standards | ASTM/ASME | ASTM B168/ASME SB168 |
| EN/DIN | EN 2.4816/DIN 17752 | |
| UNS | N06600 | |
| Surface Finish | Pickling Treatment | Hot Rolled Annealed & Pickled (HRAP), Ra 0.8-3.2μm |
| Alternative Finishes | Bead Blasted, Passivated | |
| Physical Properties | Density (g/cm³) | 8.47 |
| Melting Point (°C) | 1370-1425 | |
| Hardness (HV) | 150-220 (Annealed) | |
| Mechanical Properties | Tensile Strength (MPa) | 550-760 |
| Yield Strength (MPa) | 240-350 | |
| Elongation (%) | 30-45 (50mm gauge length) | |
| Chemical Composition | Ni (Nickel) | ≥72.0% |
| Cr (Chromium) | 14.0-17.0% | |
| Fe (Iron) | 6.0-10.0% | |
| Other Elements | C≤0.15%, Mn≤1.0%, Si≤0.5%, S≤0.015% | |
| Corrosion Resistance | High-Temp Oxidation | Excellent (Up to 1175°C) |
| Acid/Alkali Resistance | Good in HNO₃, NaOH; Limited in HCl/H₂SO₄ | |
| Chloride Resistance | Resists stress corrosion cracking | |
| Typical Applications | Aerospace | Combustion liners, exhaust systems |
| Chemical Processing | Furnace components, heat exchangers | |
| Nuclear Industry | Reactor internals, fuel element spacers | |
| Electronics | Semiconductor heating elements |
Chemical Composition Of Inconel 600 Plates
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
GNEE Inconel UNS N06600 Steel Pickling Plate Schedule
Inconel 600 Plate Size Chart
| SIZE in MM | SIZE in Inch |
|---|---|
| 3.40mm | .134" |
| 3.18mm | .125" |
| 4.75mm | .187" |
| 3.96mm | .156" |
| 7.92mm | .312" |
| 63.5mm | 2.500" |
| 6.35mm | .250" |
| 12.7mm | .500" |
| 9.53mm | .375" |
| 15.9mm | .625" |
| 22.2mm | .875" |
| 19.1mm | .750" |
| 25.4mm | 1" |
| 31.8mm | 1.250" |
| 28.6mm | 1.125" |
| 44.5mm | 1.750" |
| 38.1mm | 1.500" |
| 50.8mm | 2" |
| 76.2mm | 3" |
GNEE Group Factory Environment
GNEE Group Inconel UNS N06600 Metal Pickling Plate Factory Environment

GNEE Group Inconel Alloy UNS N06600 Pickling Plate Packaging
GNEE Group Inconel UNS N06600 Pickling Plate Packaging

GNEE Group Testing
GNEE Group Alloy UNS N06600 Metal Steel Pickling Plate Testing

FAQ
Is 400 alloy sheet easy to machine?
Poor machinability
What is the thickness range of Monel 400 sheet?
0.5 mm to 50.8 mm
What is the melting point of 400 nickel alloy sheet?
1300-1350°C (2372-2462°F)
Can Monel 400 sheet be hot or cold formed?
It is easily cold or hot formed using standard processes.
Is Monel 400 alloy sheet suitable for use in marine environments?
Yes, Monel 400 sheet is highly corrosion resistant in marine environments.
Hot Tags: inconel alloy uns n06600 metal steel pickling plate, China inconel alloy uns n06600 metal steel pickling plate suppliers, inconel alloy for switches, inconel alloy for steam turbines, inconel alloy for heat exchangers and boilers, Inconel 625, inconel alloy for printed circuit boards, inconel alloy for containers
You Might Also Like
Send Inquiry















