Inconel 601 Alloy
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
Inconel® 601 is a nickel-chromium alloy, that is highly resistant to oxidation through 2200°F. 601 alloy develops a tightly adherent oxide scale which resists spalling even under severe thermal cycling. The alloy has good high temperature strength, and retains its ductility after long service exposure. 601 alloy has good hot corrosion resistance under oxidizing conditions. 601 alloy is not suggested for use in strongly reducing, sulfur bearing environments.
Physical Properties
| Density | g/cm3 | 8.11 | |
|---|---|---|---|
| lb/in.3 | 0.293 | ||
| Melting Range | °F | 2480 - 2571 | |
| °C | 1360 - 1411 | ||
| Specific Heat | Btu/lb-°F | 0.107 | |
| J/kg-°C | 448 | ||
| Permeability at 200 oersted | 76°F (24°C) | 15.9 kA/m | 1.003 |
| -109°F (-78°C) | 15.9 kA/m | 1.004 | |
| -320°F (-196°C) | 15.9 kA/m | 1.016 | |
| Curie Temperature | °F | -320 | |
| °C | -196 | ||
Mechanical Properties
| Form and Condition | Tensile Strength | Yield Strength (0.2% Offset) |
Elongation, % |
Hardness, Rb |
||
|---|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | |||
| Rod and Bar | ||||||
| Hot-Finished | 85-120 | 585-825 | 35-100 | 240-690 | 60-15 | 65-95 |
| Annealed | 80-115 | 550-790 | 30-60 | 205-415 | 70-40 | 60-80 |
| Plate | ||||||
| Annealed | 80-100 | 550-690 | 30-45 | 205-310 | 65-45 | 60-75 |
| Sheet | ||||||
| Cold-Rolled | 115-190 | 790-1310 | 100-175 | 690-1205 | 20-2 | - |
| Annealed | 85-100 | 585-690 | 30-50 | 205-345 | 55-35 | 65-80 |
| Strip | ||||||
| Cold-Rolled | 115-190 | 790-1310 | 100-175 | 690-1205 | 20-2 | - |
| Annealed | 85-100 | 585-690 | 30-50 | 205-345 | 55-35 | 65-80 |
| Tube and Pipe | ||||||
| Cold-Drawn & Annealed | 80-110 | 550-760 | 30-60 | 205-415 | 65-35 | 70-95 |
| Wire | ||||||
| Cold-Drawn | 120-205 | 825-1415 | 100-195 | 690-1345 | 20-3 | - |
| Annealed | 90-115 | 620-790 | 35-70 | 240-480 | 45-35 | - |
| All Forms | ||||||
| Solution-Treated | 75-110 | 515-760 | 25-55 | 160-380 | 75-40 | 55-95 |
Mechanical Properties
INCONEL alloy 601 has good mechanical strength. As indicated by those values, the strength level exhibited by the alloy varies with the form and condition of the material.
The optimum condition for alloy 601 depends on the type of application and the service temperature involved. In general, the solution-treated condition is used for rupture-limited applications (temperatures of about 1000°F (540°C) and higher). The annealed condition is normally used for tensile-limited applications (temperatures below about 1000°F (540°C)).
Corrosion Resistance
The substantial nickel and chromium contents of INCONEL alloy 601 in conjunction with its content of aluminum give the alloy superior resistance to high temperature corrosion mechanisms. Of particular significance is its resistance to oxidation at temperatures up to 2200°F (1200°C). By virtue of its contents of chromium and aluminum, alloy 601 offers unique resistance to oxide spalling under cyclic thermal conditions.
Packaging&Shipping
Hot Tags: Inconel 601 Alloy, China Inconel 601 Alloy suppliers, inconel 601 sheet, hastelloy x plate, stainless and nickel alloy piping, hastelloy alloy x, alloy 825 material, nickel superalloys
Previous
Nickel Alloy Inconel 617You Might Also Like
Send Inquiry