ASTM B443 Inconel 625 Grade 1 Annealed Plate / Sheet
Alloy Grade: Inconel 625 Grade 1 (Annealed)
UNS No: N06625
W.Nr: 2.4856
Product Form: Hot‑rolled & cold‑rolled plate / sheet
Dimension Range: Thickness 0.3‑100 mm; Max width 2000 mm; Max length 6000 mm
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
ASTM B443 Inconel 625 Grade 1 annealed plate and sheet (UNS N06625, W.Nr.2.4856) is a niobium-reinforced nickel‑chromium‑molybdenum rolled flat product. Delivered in annealed condition, it is designed for service up to 593°C. It features excellent formability, weldability and resistance to chloride pitting and crevice corrosion. This grade is widely selected for chemical processing, seawater systems, flue gas desulfurization and heat exchanger components, with full PMI, mechanical and dimensional inspection available for critical projects.
ASTM B443/B443M covers nickel-chromium-molybdenum-columbium alloy (UNS N06625 - Alloy 625) plate, sheet, and strip in two grades: Grade 1 (annealed, high strength) and Grade 2 (solution-annealed, maximum corrosion resistance). Alloy 625 is a precipitation-hardenable Ni-Cr-Mo-Cb alloy delivering an exceptional combination of high strength, outstanding corrosion resistance, and excellent fabricability.
| Form | Manufacturing Process | Size Range | Typical Thickness/Tolerance |
|---|---|---|---|
| Plate / Sheet / Strip | Hot-rolled or cold-rolled from ingot/billet per standard | ASTM B443 covers plate, sheet, and strip from 0.010 in (0.25 mm) to 4 in (100 mm). Alloy 625 plate is stocked in thicknesses 0.187–3.000 in (4.75–76 mm), widths 48–96 in (1220–2440 mm). | Per standard / purchaser agreement |
Scope Statement (ASTM B443/B443M): "This specification covers nickel-chromium-molybdenum-columbium alloy (UNS N06625) plate, sheet, and strip for use in general corrosive service and high-temperature applications requiring a combination of high strength, corrosion resistance, and oxidation resistance."
Grades Covered by ASTM B443 Inconel 625 Plate
ASTM B443 covers the following grades. Each grade is defined by its UNS number and specific chemistry targeted at different service environments.
| Grade / UNS | Key Chemistry Requirements | Mechanical Properties (min) |
|---|---|---|
| Grade 1 (N06625) | Ni 58.0 min, Cr 20.0–23.0, Mo 8.0–10.0, Cb+Ta 3.15–4.15, Fe 5.0 max, C 0.10 max | Annealed: TS ≥ 827 MPa (120 ksi), YS ≥ 414 MPa (60 ksi), El ≥ 30% |
| Grade 2 (N06625) | Same chemistry as Grade 1 | Solution annealed: TS ≥ 690 MPa (100 ksi), YS ≥ 276 MPa (40 ksi), El ≥ 30% |
625 alloy Chemical Composition
| Element | Specification Limit |
|---|---|
| C | ≤0.10 |
| Cr | 20.0 – 23.0 |
| Ni | Balance |
| Mo | 8.0 – 10.0 |
| Nb + Ta | 3.15 – 4.15 |
| Fe | ≤5.0 |
| Si | ≤0.5 |
| Mn | ≤0.5 |
| Al | ≤0.40 |
| Ti | ≤0.40 |
| P | ≤0.015 |
| S | ≤0.015 |
Molybdenum and niobium are the core alloying elements, stabilizing the passive film and delivering outstanding resistance to chloride pitting and crevice corrosion for GR1 solution annealed Inconel 625 plate.
UNS N06625 Mechanical Property Requirements
| Grade / Condition | Heat Treatment | TS min MPa (ksi) | YS min MPa (ksi) | El min (%) |
|---|---|---|---|---|
| Grade 1 - Plate (Annealed) | ≥871°C (1600°F) | 827 (120) | 414 (60) | 30 |
| Grade 2 - Plate (Solution Annealed) | ≥1093°C (2000°F) | 690 (100) | 276 (40) | 30 |
| Grade 1 - Sheet (Annealed) | ≥871°C (1600°F) | 827 (120) | 414 (60) | 30 |
| Grade 2 - Sheet (Solution Annealed) | ≥1093°C (2000°F) | 690 (100) | 276 (40) | 30 |
Inconel 625 Alloy Heat Treatment Requirements
| Grade | Temperature Range | Cooling Method | Purpose |
|---|---|---|---|
| Grade 1 (Annealed) | ≥871°C (1600°F) | Air cool or faster | Standard anneal; retains some precipitation strengthening - higher strength, moderate ductility |
| Grade 2 (Solution Annealed) | ≥1093°C (2000°F) | Water quench or rapid cool | Full solution anneal; dissolves all precipitates - maximum ductility, maximum corrosion resistance |
| Stress Relief | 540–650°C (1000–1200°F) | Slow cool | Reduces residual stress after welding or cold working |
conel 625 Grade 1 Annealed Plate / Sheet Manufacturing Process (ASTM B443)
- Melting & Ingot Refining Raw materials are melted via VIM+VAR or ESR refining. Chemical composition is strictly controlled within UNS N06625 specification to minimize inclusions and segregation of Mo and Nb.
- Slab Breakdown & Hot Rolling Ingots are forged and rolled into slabs. Hot rolling is performed at controlled temperature and reduction rate to form primary plate thickness, with intermediate inspection for surface defects.
- Cold Rolling (for thin sheet) Thin sheet products go through multi-pass cold rolling with intermediate annealing to reach target gauge, while thick plates skip this cold reduction step.
- Grade 1 Solution Annealing (Core Step) Final solution annealing is carried out at 1093–1204°C, holding for time matched to section thickness, followed by rapid air or water cooling. It produces fully recrystallized austenite and removes residual stress, delivering the ductility and corrosion resistance required for Grade 1.
- Pickling & Surface Finishing Oxide scale is removed by pickling. Surface finishes including pickled, brushed or 2B are available, then flatness correction by leveling machine.
- Cutting, Edge Trimming Plates and sheets are cut to required dimensions, edges trimmed and deburred to meet ASTM B443 dimensional tolerance.
- Full Inspection & Documentation Each batch undergoes PMI, tensile, hardness, dimensional and surface inspection. MTC (EN 10204 3.1 / 3.2) is issued before packaging.

Inconel 625 Plate Industries & Applications
| Industry | Recommended Grade | Typical Service Media / Application |
|---|---|---|
| Aerospace | Alloy 625 | Engine exhaust systems, thrust reversers, turbine shroud rings |
| Chemical Processing | Alloy 625 | Reactors, heat exchangers, piping for mixed acids and chlorides |
| Marine / Offshore | Alloy 625 | Seawater piping, subsea wellhead components, umbilical tubing |
| Oil & Gas | Alloy 625 | Sour gas wellhead components, downhole tools, cladding for CRA pipe |
| Power Generation | Alloy 625 | Supercritical boiler tubes, FGD scrubber components |
| Nuclear | Alloy 625 | Reactor core components, control rod drive mechanisms |
Inconel 625 Plate & Sheet Stock Table (ASTM B443 GR1, UNS N06625)
| Product Type | Standard | Thickness Range | Regular Stock Size | Stock Status | MOQ | Lead Time (working days) | Remarks |
|---|---|---|---|---|---|---|---|
| Sheet | ASTM B443 GR1 | 0.3–3.0 mm | 1000×2000 mm, 1219×2438 mm | Limited stock | 1 sheet | 7–12 | Solution annealed, 2B / pickled finish |
| Medium Plate | ASTM B443 GR1 | 3–50 mm | 1000×2000 mm, 1500×6000 mm | Regular stock | 1 piece | 3–10 | Cut-to-size service available |
| Heavy Plate | ASTM B443 GR1 | 50–100 mm | Custom width & length | Made to order | 1 piece | 25–35 | UT inspection optional |
Note: Stock sizes are for reference only. Actual available stock and heat number shall be confirmed prior to order.
Inconel 625 Plate & Sheet Dimension Specification Table (ASTM B443 GR1)
| Product Form | Standard | Thickness | Max Width | Max Length | Delivery Condition | Surface Finish |
|---|---|---|---|---|---|---|
| Thin Sheet | ASTM B443 | 0.3–3.0 mm | 1219 mm | 2438 mm | GR1 solution annealed | Pickled / 2B / BA |
| Plate | ASTM B443 | 3.0–50 mm | 2000 mm | 6000 mm | GR1 solution annealed | Pickled, machined edge |
| Heavy Plate | ASTM B443 | 50–100 mm | 2000 mm | 6000 mm | GR1 solution annealed | Pickled / ground |
Dimensional Tolerance Table (ASTM B443)
| Item | Size Range | Tolerance |
|---|---|---|
| Thickness (Sheet) | 0.3–1.0 mm | ±0.025 mm |
| Thickness (Sheet) | 1.0–3.0 mm | ±0.05 mm |
| Thickness (Plate) | 3.0–6.35 mm | ±0.08 mm |
| Thickness (Plate) | 6.35–50 mm | ±0.13 mm |
| Thickness (Heavy Plate) | >50 mm | +0.3 / −0 mm |
| Width | ≤1219 mm | +3 / −0 mm |
| Width | 1219–2000 mm | +5 / −0 mm |
| Length | All | +5 / −0 mm |
| Flatness | All plate & sheet | ≤3 mm per 1000 mm |
Why Choose GNEE as Your Nickel Alloy Supplier?
✅ Stock Support We maintain ready stock of mainstream nickel alloys including Inconel 625 GR1 plate and sheet. Standard sizes are available for quick release, with flexible MOQ supporting both large engineering orders and small prototype batches. We confirm heat number and availability before order placement to avoid delivery delays.

✅ Custom Processing We provide one-stop secondary processing for Inconel 625 flat products. Precision cutting, surface grinding, slitting and special heat treatment can be executed per drawings. Our machining team controls flatness and edge quality to match your dimensional and assembly requirements.
✅ Quality Inspection Every batch undergoes a full inspection workflow including PMI, tensile test, dimensional check and surface examination. Third-party witness testing and EN 10204 3.1 / 3.2 certificates are available. All test records are archived to guarantee full material traceability for critical projects.

✅ Packaging & Shipment Export-grade multi-layer packaging is adopted to prevent scratches, moisture and oxidation during sea or air transit. We mark alloy grade, heat number and specs clearly on packages. We coordinate reliable logistics and supply complete customs documents for global delivery.





Contact us for the latest export price quote for 625 Alloy
Beyond Inconel 625 GR1 plate and sheet, we supply a full portfolio of Inconel 625 product forms to match diverse engineering requirements. We stock and process round bar, square bar, hexagonal bar to ASTM B446, available in hot rolled, turned and ground finishes for fastener and machining blanks.
Our seamless and welded tubes, capillary tubes are produced per ASTM B444, B829, B704 and B705, widely used for heat exchangers and precision instrument tubing. Custom open-die and closed-die forgings including rings, shafts and flanges are offered to ASTM B564, with full NDT and heat treatment according to drawing specifications.
All these forms follow the same strict GNEE quality control, PMI verification and export packaging standards as our plate products.
Hot Tags: astm b443 inconel 625 grade 1 annealed plate / sheet, China astm b443 inconel 625 grade 1 annealed plate / sheet suppliers, 725 Inconel Alloy, alloy 600 material, inconel alloy for boxes and containers and drums, inconel alloy for resistors, Material Inconel 686, premium inconel alloy
You Might Also Like
Send Inquiry














