Slip On Flanges
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
Slip-on (SO) flanges are a type of flange that has a flat face on the sealing surface and are typically used in low-pressure applications. They are called "slip-on" because they can be easily slipped onto the end of a pipe or fitting and then welded in place. They also have a bored-out inner diameter that matches the pipe's outer diameter, allowing for a smooth flow of fluids or gases.
| Product Type | Slip-on pipe flange, ASME 16.5 Slip On Flanges / SORF Flanges |
|---|---|
| Size | ½" (15 NB) to 48″ (1200NB) |
| Class | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc. |
| Stainless Steel Slip on Flanges | ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L |
| Carbon Steel Slip on Flanges | ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70 |
| Alloy Steel Slip on Flanges | ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91 |
| Duplex Steel Slip on Flanges | ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61 |
| Specialize | As per drawing |
| Standard | ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 ,JIS,DIN,BS4504,SABS1123,EN1092-1, UNI,AS2129,GOST-12820 DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 B.S : BS4504 , BS4504, BS1560, BS10 |
| Connection Type / Flange Face Type | Ring Type Joint, Lap-Joint Face, Raised Face, Flat Face, Large Male-Female, Small Male-Female, Large Tongue & Groove, Small Tongue & Groove |
Types of Slip-On Flanges and Their Applications
There are two main types of slip-on flanges, each designed to meet specific requirements and applications within piping systems:
Standard Slip-On Flanges
Standard or raised face slip-on flanges have a raised face on the sealing surface. This feature provides a platform for the gasket, ensuring a reliable seal between the flange and the adjacent pipe or fittings. As a result, they are well suited for low-pressure applications where bolt tightening forces can sufficiently compress the gasket to prevent leaks.
Lap Joint Slip-On Flanges
Lap joint slip-on flanges have a flat face and a separate support flange. The support flange is slipped over the end of the pipe and aligned with the lap joint stub end, which is then connected to the pipe. This design allows for rotational movement, providing alignment flexibility during installation or maintenance. They are often used in systems that require frequent disassembly, thermal expansion or contraction applications.
Slip On Flanges Use
Slip On Flanges are commonly used in the following applications:
Low-Pressure Applications: Slip On Flanges are extensively used in low-pressure applications, such as water and gas pipelines, where the pressure does not exceed 300 psi.
Chemical and Petrochemical Plants: Slip On Flanges are common in chemical and petrochemical plants, where they connect piping systems and equipment.
HVAC Systems: Slip On Flanges are common in HVAC (Heating, Ventilation, and Air Conditioning) systems, where they are used to connect ductwork and piping.
Water Treatment Plants: Slip On Flanges find their usage in water treatment plants, which connect piping systems and equipment.
Food and Beverage Industry: Slip On Flanges are extensive in the food and beverage industry, where they are used to connect piping systems and equipment.
Advantages of slip-on flange
- Lower installation cost
- Easier to align with other parts during installation
- Better leak prevention
- Welding inside and outside the flange
- Shorter time for accurate pipe cutting
- Since the pipe slides on the flange, it is compatible with the lower hub on the sliding flange
Packaging&Shipping

Hot Tags: slip on flanges, China slip on flanges suppliers
Previous
Blind FlangesNext
No InformationYou Might Also Like
Send Inquiry














