Inconel Hot Finished 600 Round Bars

Inconel Hot Finished 600 Round Bars

Inconel 600 round bar is a nickel-based alloy with good carburizing properties and excellent high temperature corrosion resistance. Inconel 600 round bar is effective against dry Cl2 and many other gases at mild and high temperatures. 600 alloy bar is a nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride pressure cracking, clean water corrosion and acid oxidation. Inconel 600 flat bar is also a nickel-chromium-iron alloy with good corrosion resistance at high temperatures and resistance to chloride ion pressure corrosion, clean water rapid corrosion and combustion corrosion.

Alloy 600 round bar is a nickel-based alloy with excellent carburizing properties and excellent high temperature corrosion resistance. Alloy 600 round bar has long been used in the heating industry for a wide range of applications. Inconel alloy 600 has a wide service temperature range up to 2000°F (about 1200°C).

Inconel 600 Alloy Round Bar Specifications

Specifications: ASTM B 166 / ASME SB 166
Dimensions: Meets ASTM, ASME and API standards
Dimensions: 5 mm to 500 mm diameter, 100 mm to 6000 mm length, Meets NACE MR 01-75 standards.

Length: 100 mm to 3000 mm and above
Surface Finish: Bright, Polished and Blackened
Grades: Inconel 600 – UNS N06600
Shapes: Round, Square, Hexagonal (A/F), Rectangular, Wire (Coil), Wire Mesh, Billets, Ingots, Forgings, etc.

Chemical Composition of Alloy 600 Rods

Grade	Ni	Cr	Fe	C	Mn	S	Si	Cu
Inconel 600	72.0 min	14.0 – 17.0	6.0 – 10.0	0.15 max	1.0 max	0.015 max	0.5 max	0.5 max

Mechanical Properties of Inconel 600 Bars

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.47 g/cm3	1413 °C (2580 °F)	Psi – 95,000 , MPa – 655	Psi – 45,000 , MPa – 310	40 %

Size Chart of Inconel 600 Rod

Metric		Canadian/ASTM		Japanese		US Bar
Diam. (mm)	Bar Size	Diameter (mm2)	Bar Size	Diameter (mm)	Bar Size	Diam. (Inch)	Bar Size
6	6	300	20M	13	13	0.500	#4
5	5	100	10M	6	6	0.250	#2
7	7	500	25M	16	16	0.625	#5
5.5	5.5	200	15M	10	10	0.375	#3
8	8	700	30M	19	19	0.750	#6
10	10	1500	45M	25	25	1.000	#8
9	9	1000	35M	22	22	0.875	#7
50	50	-	-	-	-	-	-
11	11	2500	55M	29	29	1.125	#9
14	14	-	-	35	35	1.375	#11
12	12	-	-	32	32	1.250	#10
16	16	-	-	38	38	1.500	#12
20	20	-	-	44	44	1.750	#14
22	22	-	-	48	48	1.875	#15
18	18	-	-	41	41	1.625	#13
28	28	-	-	57	57	2.250	#18
25	25	-	-	51	51	2.000	#16
32	32	-	-	-	-	-	-
40	40	-	-	-	-	-	-
36	36	-	-	-	-	-	-
44	44	-	-	-	-	-	-

GNEE Group Inconel Hot Finished 600 Round Bars Factory Environment

GNEE Group Inconel Hot Finished 600 Round Bars Packaging

GNEE Group Inconel Hot Finished 600 Round Bars Testing

What is the electrical conductivity of Inconel 600 alloy rod?
Metric units: 14.8 W/m·K to 20.9 W/m·K.
What is the melting point of Inconel 600 alloy flat bar?
1354-1413°C
Why does AMS 5580 bright bar crack?
Because of thermal stress
Is nickel alloy 600 annealed bar difficult to cut?
Very hard
What is the best way to weld 600 alloy hexagonal bar?
Gas Tungsten Arc Welding (GTAW)

Hot Tags: inconel hot finished 600 round bars, China inconel hot finished 600 round bars suppliers, x750 sheet, inconel alloy 600, inconel alloy for coolers, inconel alloy warehousing, magnetic properties of inconel alloy, inconel alloy lead time