Inconel Astm B163 600 Thick-walled Pipe
Type: Seamless, Welded
OD: 1/2 inch - 48 inches
Thickness: SCH5-SCHXXS
Length: 0-12 meters, customized
Process: Hot rolling/cold rolling, hot working, cold drawing
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
GNEE Astm B163 600 Thick-walled Pipe introduce
Inconel Astm B163 600 Pipe
GNEE Inconel B163 600 Thick-walled Pipe introduce
As a leading Inconel pipe supplier in China, Gnee Steel manufactures and produces a wide range of Inconel 600 thick wall pipes.
INCONEL (Nickel-Chromium-Iron) Alloy 600 (UNS N06600 / W.Nr. 2.4816) is a standard engineering material for corrosion-resistant and heat-resistant applications. The alloy also has excellent mechanical properties and combines high strength with good machinability.
Inconel 600 thick wall pipe is a seamless thick wall Inconel 600 pipe. Compared with Inconel 600 seamless pipe, it not only has the characteristics of high temperature and corrosion resistance, but also has better high pressure resistance. Therefore, Inconel 600 thick wall pipe is often used in high pressure equipment. In the manufacturing process, due to the thick wall thickness, cold rolling and cold drawing processes are no longer applicable, so Inconel 600 thick wall pipe is made of Inconel 600 round bar through perforation and hot rolling.
GNEE Alloy Inconel Astm B163 600 Thick-walled Pipe Specification
Astm B163 600 Thick-walled Pipe Customized Dimensions
| Outside Diameter (OD) | Wall Thickness (THK) | Length (L) |
|---|---|---|
| 10 mm | 2.5 mm | 0.5 m |
| Customizable | Customizable | Customizable |
| 600 mm | 100 mm | 12 m |
Chemical Composition Of Alloy 600 Thick-walled Pipe
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Inconel Astm B163 600 Thick-walled Pipe Physical Properties
| Density | g/cm3 | 8.47 | |
|---|---|---|---|
| lb/in.3 | 0.306 | ||
| Melting Range | °F | 2470 - 2575 | |
| °C | 1354 - 1413 | ||
Inconel Astm B163 600 Thick-walled Pipe Mechanical Properties
| Condition & Size | Tensile Strength | Yield Strength (0.2% Offset) |
Elongation | Reduction of Area | Hardness |
|---|---|---|---|---|---|
| MPa, min | MPa, min | %, min | %, min | Rockwell | |
| Hot-worked or hot-worked annealed / 5 in. (127 mm) in outside diameter and under | 550 | 205 | 35 | ... | ... |
| Hot-worked or hot-worked annealed / Over 5 in. (127mm) in outside diameter | 515 | 170 | 35 | ... | ... |
| Cold-worked annealed / 5 in. (127 mm) in outside diameter and under | 550 | 240 | 30 | ... | ... |
| Cold-worked annealed / Over 5 in. (127mm) in outside diameter | 550 | 205 | 35 | ... | ... |
Gnee Steel Inconel Astm B163 600 Thick-walled Pipe Application
Chemical Processing:
Resistant to various acids, alkalis and other corrosive substances, it can be used in reactors, heat exchangers and process pipelines.
Heat Treatment:
Its high temperature resistance makes it suitable for furnaces, heat exchangers and other heating equipment.
Nuclear Power:
Due to its excellent corrosion resistance and non-magnetic properties, it can be used in various parts of nuclear reactors.
Aerospace:
Due to its high strength and good durability, it can be used in high temperature parts such as gas turbine engines.
GNEE Group B163 600 Thick-walled Pipe Packaging
GNEE Group Inconel Astm B163 600 Thick-walled Pipe Packaging
GNEE Group Testing
GNEE Group Inconel B163 600 Pipe Testing
FAQ
Q: What other forms of Inconel 600 does Gnee Steel offer?
Q:What are the temperature limits for Inconel 600?
A:The temperature limits for Inconel 600 during hot working should be between 1600°F and 2250°F. Processing in the 1200°F to 1600°F range must be avoided because the material's ductility decreases in this temperature range, affecting its properties.
Q:What is the cutting speed of Inconel 600?
A:The empirical cutting parameters for machining Inconel 600 are as follows:
Cutting speed: 20 m/min to 80 m/min
Cutting feed: 0.1 mm/rev to 0.3 mm/rev
Back cutting depth: 0.3 mm to 5 mm
Rake angle: 3° to 10°
Back angle: 8° to 15°
Tool edge inclination: 0° to 4°
Hot Tags: inconel astm b163 600 thick-walled pipe, China inconel astm b163 600 thick-walled pipe suppliers, 2 4816 inconel 600, in625, inconel 600 astm standard, inconel 601 round bar, Inconel 686, x750 sheet
You Might Also Like
Send Inquiry