Inconel 600 Bar
As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.
- Send E-mail: ss@gneesteel.com
- Tel: +8615824687445
Uns N06600 Alloy Bar description
GNEE Inconel 600 Bar
Inconel 600 bar is a high-performance nickel-chromium-iron superalloy with a typical composition of ≥72% nickel, 14–17% chromium, and 6–10% iron. It operates across a temperature range extending from cryogenic levels up to 1095°C (2000°F), maintaining its mechanical properties and resistance to high-temperature oxidation throughout this range. Regarding corrosion resistance, it is virtually immune to chloride-ion stress-corrosion cracking and exhibits high resistance to a wide variety of organic and inorganic compounds.
The alloy is primarily strengthened through cold working rather than precipitation hardening, and it is readily weldable and machinable. Common specifications include AMS 5665 / AMS 5540 (aerospace standards) and ASTM B166 / ASME SB166 (standards for rod and bar).
Inconel 600 Round Bar Equivalent
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Gnee Alloy offers a wide range of high-quality Inconel 600 bars in various sizes, and provides customization services and worldwide shipping to meet your specific project needs.
Contact us now to get an export quote for Inconel 600 Bar
Uns N06600 Alloy Bar Specification
| Specification | AMS 5665, ASTM B166 |
|---|---|
| Form | Round, Square, Hex (A/F), Bush, Rectangle, Flat, Billet, Ingot, Forging, PSQ Bar, Rod, etc. |
| Size Range | 15NB to 150NB In |
| Length | 100 mm To 3000 mm Long & Above |
| Diameter | ½" to 12" |
| Tolerance | H8, H9, H10, H11, H12, H13, K9, K10, K11, K12 or as per clients' requirements |
| Finish | Cold Drawn, Shot Blast & Drawn, 240 Grit Belt Polished, Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish, High Polished |
| Condition | Cold Drawn Polished, Cold Drawn Centreless Ground & Polished, Threading |
| Surface | Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline |
| Manufacturing Process | Cold drawn / Extruded |
Inconel 600 Bar Specification
Inconel 600 Round Bar Chemical Properties
| Alloy Element | ASTM B166 Standard Range (wt%) | Export Internal Control Standard (wt%) | Industry Service Function Analysis |
|---|---|---|---|
| Ni | ≥ 72.0 | 72.5 – 75.0 | Stabilizes the austenitic structure; prevents high‑temperature phase transformation cracking; resists stress corrosion cracking |
| Cr | 14.0 – 17.0 | 15.0 – 16.5 | Forms a dense oxide protective film; resists high‑temperature flue gas oxidation and carburization attack |
| Fe | 6.0 – 10.0 | 7.0 – 9.0 | Balances alloy toughness; significantly improves cold working, turning, and bending formability |
| C | ≤ 0.15 | ≤ 0.08 | Low‑carbon control; prevents intergranular carbide precipitation under high‑temperature service; avoids material embrittlement |
| Mn / Si | Mn ≤ 1.0, Si ≤ 0.5 | Mn ≤ 0.8, Si ≤ 0.3 | Reduces impurity segregation; improves bar surface finish and weld sealing integrity |
| S / P | ≤ 0.015 | ≤ 0.005 | Ultra‑low impurities; eliminates machining cracks and high‑temperature micro‑defects |
Alloy 600 Round Bar Mechanical Properties
| Test Condition | Tensile Strength | 0.2% Yield Strength | Elongation | Brinell Hardness |
|---|---|---|---|---|
| Room Temperature 25°C | ≥ 550 MPa | ≥ 240 MPa | ≥ 30% | ≤ 200 HB |
| 500°C High‑Temperature Condition | ≥ 480 MPa | ≥ 210 MPa | ≥ 32% | Hardness stable, no degradation |
| Ultra‑Low Temperature ‑196°C | Slight increase in strength | Stable performance | No low‑temperature brittle fracture | Toughness maintained throughout |
Click to download the Inconel 600 alloy PDF datasheet
Inconel 600 Bar Technical Data Sheet
Sizes of 600 Inconel Round Bar
| Size & Dimensions of inconel 600 round bar | |||||||
|---|---|---|---|---|---|---|---|
| Metric | US Bar | ASTM/ Canadian | Japanese | ||||
| Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
| 5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
| 5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
| 6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
| 7 | 7 | #5 | 0.600 | 25M | 500 | 16 | 16 |
| 8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
| 9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
| 10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
| 11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
| 12 | 12 | #10 | 1.250 | 32 | 32 | ||
| 14 | 14 | #11 | 1.375 | 35 | 35 | ||
| 16 | 16 | #12 | 1.500 | 38 | 38 | ||
| 18 | 18 | #13 | 1.600 | 41 | 41 | ||
| 20 | 20 | #14 | 1.750 | 44 | 44 | ||
| 22 | 22 | #15 | 1.875 | 48 | 48 | ||
| 25 | 25 | #16 | 2.000 | 51 | 51 | ||
| 28 | 28 | #18 | 2.250 | 57 | 57 | ||
| 32 | 32 | ||||||
| 36 | 36 | ||||||
| 40 | 40 | ||||||
| 44 | 44 | ||||||
| 50 | 50 | ||||||
Inconel 600 Round Bar Weight Chart
| Round Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
| 3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
| 1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
| 5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
| 4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
| 3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
| 5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
| 7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
| 6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
| 1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
| 7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
| 5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
| 8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
| 9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
| 3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
| 10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
| 11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
| 7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
| 12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
| 1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
| 13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
| 14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
| 9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
| 15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
| 5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
| 16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
| 17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
| 11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
| 18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
| 3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
| 2-1/2" | 7.576 | 24.856 | ||||||
| 2-5/8" | 8.354 | 27.409 | ||||||
| 2-3/4" | 9.169 | 30.083 | ||||||
Inconel 600 Bar Range: Dimensions, Tolerances
Gnee Alloy offers flexible production capabilities to meet the needs of both standard and custom projects.
Diameter Range:
Cold-drawn Bars: 3mm to 100mm (0.125 inches to 4.0 inches)
Hot-rolled/Forged Bars: 100mm to 400mm (4.0 inches to 16.0 inches)
Length: Standard lengths are 3 meters or 6 meters. We also offer on-demand cutting services to meet specific project requirements.
Tolerances: We offer high-precision bars with tolerances ranging from h8, h9 to k11, ensuring your CNC machining minimizes processing losses.
Contact us to customize Inconel 600 products to your project's dimensions
Gnee Steel offers the full range of Inconel 600 products
You may be looking for Inconel 600 bars, but most industrial projects require a comprehensive material solution. We offer a one-stop shop for the Inconel 600 product range:
Inconel 600 Plates (compliant with ASTM B168)
Inconel 600 Seamless Tubes (compliant with ASTM B167)
Inconel 600 Fittings and Forged Flanges
Inconel 600 Fasteners
Hot Rolled and Cold drawn Process of Nickel 600 Round Bar
Hot Rolled and Cold drawn Process of Nickel 600 Round Bar
Our Inconel 600 bars are manufactured using precision metallurgical processes to ensure consistency, strength, and durability:
🔩 Raw Material Selection
We select high-purity nickel, chromium, and iron, verifying their compliance with 600 alloy composition standards.
🔥 Melting and Alloying
Raw materials are melted in a controlled furnace and alloyed to obtain a uniform chemical structure and composition.
🧱 Hot Forging or Rolling
The alloy is hot-worked into bars by forging or rolling, thereby improving grain structure and mechanical strength.
🌊 Heat Treatment
Quenching and annealing processes are used to relieve stress and improve corrosion resistance and high-temperature performance.
🛠 Machining and Surface Finishing
The bars are precision-machined to meet dimensional tolerances and polished (bright, black, or satin finish).
🧪 Testing and Inspection
Each batch of products undergoes mechanical, chemical, and non-destructive testing (NDT)-including ultrasonic testing, pitting corrosion testing, and intergranular corrosion testing-to ensure quality.
📦 Packaging and Shipping
Finished bars are packaged in wooden crates, rolls, or films with core tubes to ensure safe and corrosion-free transportation.
Contact us to learn about our Inconel 600 production process
Comparative Material Selection Analysis: Inconel 600 vs. Other Key Nickel-Based Alloy Grades
Overseas procurement often confuses Inconel 600, 625, and 718 nickel-based bars. Mismatches between materials and operating conditions lead to equipment failure and wasted costs. Drawing on 18 years of practical experience, this comparison clarifies the suitable applications for each grade:
| Alloy / Type | Strengthening Mechanism | Key Strengths | Limitations | Primary Applications |
|---|---|---|---|---|
| Inconel 600 Bar (Solid‑Solution Heat‑Resistant Type) | Solid‑solution strengthening | High‑temperature oxidation resistance, carburization resistance, good workability, high cost‑effectiveness | Moderate high‑pressure strength and corrosion resistance | Furnace structural components, general chemical corrosion protection, high‑temperature static components |
| Inconel 625 Bar (Solid‑Solution Corrosion‑Resistant Type) | Solid‑solution strengthening (high Mo content) | Excellent corrosion resistance, outstanding high‑pressure performance | Higher cost | Marine environments, strong acid/alkali conditions, high‑pressure corrosive services; not required for general high‑temperature oxidation scenarios |
| Inconel 718 Bar (Precipitation‑Hardening High‑Strength Type) | Age‑hardening (γ' / γ'' precipitation) | Ultra‑high strength after heat treatment, excellent creep resistance | Difficult to machine, higher cost | Only for high‑pressure dynamic and aerospace load‑bearing conditions; not suitable for general corrosion‑protection furnace applications |
Contact our experts to recommend the right alloy for your project
Inconel 600 Bar Price List
| Price List of Inconel 600 Round Bar | Inconel 600 Bar Price in India (INR) | Inconel 600 Round Bar Price in USD |
| Inconel 600 Rod Price Per Kg | ₹ 3100 | $ 42.17 USD |
| Alloy 600 Rod Price Per Kg | ₹ 1500 | $ 43.10 USD |
| ASTM B166 UNS N06600 Round Bar Price | ₹ 5000 | $ 54.17 USD |
| Inconel 600 Material Round Rod Price | ₹ 6160 | $ 67.20 USD |
| Inconel 600 Round Bar Price Per Kg | Rs. 1890 | $ 39.04 USD |
| Inconel 600 Alloy Hex Bar / Rod 10mm (A/F) x 2000mm Price | ₹ 2198 | $ 50.07 USD |
| Price of ASTM B166 N06600 Bar 10.0mm dia x 500mm long | ₹ 5078 | $ 76.42 USD |
| Price of Inconel 2.4816 Square Bar | ₹ 6987 | $ 87.07 USD |
| UNS N06600 Flat Bar Price List | ₹ 2200 | $ 14.0 USD |
| AMS 5665 Inconel 600 Bar | ₹ 1600 | $ 13.0 USD |
Contact us for the latest 2026 export prices for Inconel 600
Inconel 600 Bar Shipping Time As Per Location
| Price Variations 5 % extra | |
|---|---|
| Export to | Shipping Time in Days |
| Malaysia | 10 |
| Italy | 30 |
| Philippines | 14 |
| Oman | 5 |
| Kuwait | 10 |
| South Africa | 25-30 |
| UAE | 5 days |
| USA | 40-60 |
| Bahrain | 9 |
| Saudi Arabia | 7 |
| Singapore | 8 |
| Qatar | 7 |
| France | 30 |
| Uk | 30 |
| Indonesia | 9 |
Contact us for a customized solution for your project
Products and services offered by Gnee Alloy
Applications of Inconel 600 Bar
Aerospace: Jet engine components, gas turbine parts, rocket engines, and fasteners.
Oil and Gas: Downhole drill pipes, wellhead components, valves, and pump assemblies.
Chemical Industry: High-temperature reactors and pipelines.
Marine: Submarine components and high-strength shafts.
Nuclear Energy: Reactor core and control rod components.
Packaging method for Alloy 600 Bar
Gnee Alloy uses the safest and most effective packaging methods for all types of cargo transportation. Our packaging methods include:
Wooden crates
Wooden pallets
Shrink wrap packaging
Cardboard boxes
Wooden crates (slatted)
Inconel 600 Bar material certificate
Inconel 600 Bar material certificate
About Gnee Alloy
Request the latest Inconel 600 Bar price list. Please call +8615824687445 or email ss@gneesteel.com for information on available stock and the latest price list for Nickel 600 Bar.
Please contact us to get a quick quote for the inconel 600 Bar you need
We supply these Inconel 600 Bar according to DIN, ISO, JIS, or ANSI/ASME standards.
"We provide DDP/CIF shipping services to Germany and Italy."
FAQ
Q1: What is the maximum high-temperature resistance of Inconel 600 bar? Is it suitable for furnace applications?
A: It offers stable performance during long-term service in oxidizing and carburizing atmospheres at temperatures up to 1093°C. It is a specialized bar stock designed for industrial heat treatment furnaces, carburizing furnaces, and high-temperature kilns, offering excellent suitability for furnace operating conditions.
Q2: Does Inconel 600 bar require heat treatment?
A: No age-hardening treatment is required; the material is supplied in a solution-annealed state, which is optimal for use. It can be directly machined (turned), welded, and formed, offering simple processing and strong adaptability for on-site applications.
Q3: How does Inconel 600 bar compare to 310S stainless steel bar in high-temperature applications?
A: 310S stainless steel is prone to embrittlement and has poor carburization resistance during long-term high-temperature service. In contrast, Inconel 600 bar maintains a stable microstructure at high temperatures and offers superior resistance to carburization and nitriding, resulting in an equipment service life 3–5 times longer than that of stainless steel.
Q4: What are the welding characteristics of Inconel 600 bar? Is it susceptible to intergranular corrosion?
A: It exhibits excellent welding performance. A strictly controlled low-carbon manufacturing process eliminates the risk of post-weld intergranular corrosion. The properties of the welded joints match those of the base metal, meeting the requirements for various structural welding applications.
Q5: Do you support custom processing and specifications for export?
A: Yes, we support services such as cut-to-length, precision grinding, straightening, and custom forging of irregular shapes. We can provide a full set of qualification documents in English to meet global engineering acceptance standards and facilitate long-term framework partnerships.
Hot Tags: inconel 600 bar, China inconel 600 bar suppliers, ductile inconel alloy, nickel alloy 725, inconel alloy for boxes and containers and drums, inconel alloy for actuators, inconel alloy for flanges, inconel alloy 600
Previous
Inconel Alloy 601 TubeNext
Inconel 625 BarYou Might Also Like
Send Inquiry