Nickel Alloy UNS N10665 Hastelloy B2
video

Nickel Alloy UNS N10665 Hastelloy B2

Hastelloy B2 is a solid solution strengthened, nickel-molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulfuric, acetic and phosphoric acids. Molybdenum is the primary alloying element which provides significant corrosion resistance to reducing environments.
Send Inquiry
Chat Now

As a leading supplier and manufacturer in China, GNEE Steel provides cost-effective nickel-based alloy products.

Product Introduction

Hastelloy B2 is a solid solution strengthened, nickel-molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulfuric, acetic and phosphoric acids. Molybdenum is the primary alloying element which provides significant corrosion resistance to reducing environments. This nickel steel alloy can be used in the as-welded condition because it resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone.

Chemical Composition (%) :

Ni Mo Fe C Co Cr Mn Si P S  
Balance 26.0-30.0 2.0 max .02 max 1.0 max 1.0 max 1.0 max .10 max .040 max .030 max  

Physical Properties

Density Melting range
9.2 g/cm³ 1330-1380°C

Mechanical Properties (Minimum value at 20℃)

Heat treatment Method Tensile Strength (σb/MPa) Yield Strength (σp0.2/MPa) Elongation (σ5/%) Brinell hardness HBS
Solution Treatment 745 325 40 ≥250

Hastelloy B2 steel

Corrosion Resistances

  • Total corrosion, the performance characteristics of B2 alloy against hydrochloric acid, sulfuric acid, phosphoric acid and other inorganic acids are basically the same as Hastelloy B alloy. The corrosion resistance is generally better than that of Hastelloy B alloy, especially after welding. In 20% boiling hydrochloric acid, even if the B2 alloy is deformed by 50% in cold working, it does not affect its corrosion resistance.
  • Intergranular corrosion, due to the low content of carbon, silicon and iron in Hastelloy B2 alloy, carbides and some intermetallic phases in sensitized steel are far less than Hastelloy B alloy, therefore, the resistance of this alloy to intergranular corrosion better.
  • Stress corrosion, the test shows that when the residual Fe≤2% and Cr≤1.0% in the Hastelloy B2 alloy is too low compared with the same alloy with proper control of the amount of iron and chromium. Better than the former.

Hastelloy Alloy B2 Characteristic

  • Control iron and chromium elements in low content, prevent the formation of β phase Ni4Mo.
  • Excellent corrosion resistance to reducing environments.
  • Good resistance to medium concentration sulfuric acid and many non – oxidizing acids.
  • Excellent resistance to chloride ion reduction stress corrosion cracking (SCC).
  • Excellent resistance to organic acid corrosion.
Packaging&Shipping

hastelloy steel b2

nickel alloy B2 material

 

Hot Tags: nickel alloy uns n10665 hastelloy b2, China nickel alloy uns n10665 hastelloy b2 suppliers, 801 plate, 2 4617 hastelloy, alloy b2, GH4169 nickel based superalloy, inconel alloy 625, hast g30 material

Send Inquiry

whatsapp

skype

E-mail

Inquiry